MOT Status
ExpiredMileage
88,608 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Front Headlamp has a product on the lens but not seriously reducing light output Both (4.1.4 (b))
Rear Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Front Lower Suspension arm pin or bush excessively worn X2 Rear Bushes (5.3.4 (a) (i))
Hazard warning switch inoperative (4.4.2 (a) (ii))
Offside Rear Brake pipe excessively corroded (1.1.11 (c))
Parking brake efficiency below requirements (1.4.2 (a) (i))
Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Front Headlamp has a product on the lens but not seriously reducing light output Both (4.1.4 (b))
Rear Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Under-Body Corrosion
Front Suspension arm pin or bush worn but not resulting in excessive movement X2 Rear Bush (5.3.4 (a) (i))
Offside Rear Brake pipe corroded, covered in grease or other material X2 (1.1.11 (c))
Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill (6.1.1 (c) (i))
Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill (6.1.1 (c) (i))
Front Suspension arm pin or bush worn but not resulting in excessive movement X2 Rear Bush (5.3.4 (a) (i))
Offside Rear Brake pipe corroded, covered in grease or other material X2 (1.1.11 (c))
Front Suspension arm pin or bush worn but not resulting in excessive movement rear bushes x2 (5.3.4 (a) (i))
Outer Integral body structure is corroded but structural rigidity is not significantly reduced sills corroded both sides (6.1.1 (c) (i))
Offside Rear Brake pipe excessively corroded (1.1.11 (c))
Nearside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Front Suspension arm pin or bush worn but not resulting in excessive movement rear bushes x2 (5.3.4 (a) (i))
Outer Integral body structure is corroded but structural rigidity is not significantly reduced sills corroded both sides (6.1.1 (c) (i))
Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Front Bumper insecure (6.1.4 (a) (i))
Nearside Front Headlamp insecure (4.1.1 (c))
Nearside Front Road wheel fixing missing (5.2.1 (a) (i))
Offside Front Position lamp not working (4.2.1 (a) (ii))
Offside Front Road wheel fixing missing (5.2.1 (a) (i))
Parking brake efficiency below requirements (1.4.2 (a) (i))
Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))
Rear Bumper insecure (6.1.4 (a) (i))
Nearside Front Service brake binding but not excessively (1.2.1 (f))
Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Nearside Rear Service brake binding but not excessively (1.2.1 (f))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Parking brake lever defective but can be satisfactorily operated (1.1.6 (d))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Rear Direction indicator not working (4.4.1 (a) (ii))
Nearside Rear Position lamp not working (4.2.1 (a))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Registration plate lamp does not illuminate simultaneously with the position lamps (4.7.2 (a))
Nearside Rear Stop lamp(s) all not working (4.3.1 (a) (iii))
Engine oil on minimum
Nearside Rear Rear reflector slightly deteriorated but function not impaired (1.5.1c)
Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Windscreen washer provides insufficient washer liquid (8.2.3)
Engine oil on minimum
Nearside Rear Rear reflector slightly deteriorated but function not impaired (1.5.1c)
Odd size tyres fitted front & rear
Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)
both front tyres worn on inside edge
Centre Windscreen wiper does not clear the windscreen effectively (8.2.2)
Nearside Headlamp aim too high (1.8)
Offside Headlamp aim too low and too far to the right. (1.8)
Offside rear parking brake recording little or no effort (3.7.B.6a)
Offside rear brake binding (3.7.B.1) DANGEROUS
Parking brake lever has little reserve travel (3.1.6b)
both front tyres worn on inside edge
Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
front tyres BIG ? n/s/r tyre worn outer edge / cracked.
Be advised that you have two different size tyres fitted on your car which could alter your speedo reading and cause a problem with your insurance company as they are not standard fitment.175/65/14 on front,155/65/14 on rear.
Be advised that you have two different size tyres fitted on your car which could alter your speedo reading and cause a problem with your insurance company as they are not standard fitment.175/65/14 on front,155/65/14 on rear.
Nearside Headlamp aim too low and too far to the right. (1.8)
Offside Headlamp aim too high (1.8)
How Reliable is the Toyota Aygo?
Based on 3,073,569 MOT tests across 286,185 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
CA08 KWF is a 2008 Toyota Aygo in Silver with a 998cc petrol engine. This vehicle has been through 22 MOT tests with a personal pass rate of 59.1%.
Across all 2008 Toyota Aygo models, the average MOT pass rate is 74.7% with a typical mileage of 54,541 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Toyota Aygo fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 33,372 recorded failures. If you're considering buying CA08 KWF, it's worth having these areas checked by a mechanic before committing.
The Toyota Aygo typically stays on UK roads for around 21 years. At 18 years old, this Toyota Aygo is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of CA08 KWF?
You can check the full history of CA08 KWF by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was CA08 KWF registered?
CA08 KWF is a 2008 Toyota Aygo, first registered on 16 July 2008.
Is CA08 KWF safe to buy?
The MOT history for CA08 KWF shows 22 tests with a 59.1% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does CA08 KWF have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on CA08 KWF. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.