2008 Smart Fortwo Passion 71 Auto

Anti-lock braking system warning lamp indicates an ABS fault (1.6 (b))

Driver's door cannot be opened from inside the vehicle (6.2.3 (a))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Front Side repeater not working (4.4.1 (a) (ii))

Horn not working (7.7 (a))

Nearside Front Headlamp light intensity severely reduced (4.1.4 (a))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Nearside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))

Nearside Rear Brake pipe excessively corroded (1.1.11 (c))

Nearside Rear Position lamp not working (4.2.1 (a) (ii))

Offside Front Headlamp light intensity severely reduced (4.1.4 (a))

Offside Front Macpherson strut pin or bush excessively worn top mount (5.3.4 (a) (i))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Offside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Offside Rear Brake pipe excessively corroded (1.1.11 (c))

Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Front Brake disc worn, pitted or scored, but not seriously weakened both (1.1.14 (a) (ii))

Nearside Front Coil spring corroded (5.3.1 (b) (i))

Nearside Front Track rod end ball joint has slight play (2.1.3 (b) (i))

Nearside Rear Shock absorbers has light misting of oil (5.3.2 (b))

Offside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Rear Integral body structure is corroded but structural rigidity is not significantly reduced bumper support (6.1.1 (c) (i))

Offside mirror cover missing

Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Nearside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e))

Offside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e))

Nearside Front Coil spring corroded (5.3.1 (b) (i))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Central Front Windscreen washer not working (3.5 (a))

Fuel cap/sealing device component leaking (6.1.3 (b) (i))

Nearside Front Coil spring corroded (5.3.1 (b) (i))

Nearside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Offside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Front Windscreen washer not working o/s + n/s (3.5 (a))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Rear Registration plate lamp inoperative in the case of a single lamp or all lamps o/s + n/s (4.7.1 (b) (ii))

Nearside Front Coil spring corroded (5.3.1 (b) (i))

Nearside Front Inner Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Front Tyre slightly damaged/cracking or perishing tread cracking (5.2.3 (d) (ii))

Nearside Rear Brake pipe corroded, covered in grease or other material Brake pipe corroded material wall thickness can not be determined. Strong advice replace ASAP. (1.1.11 (c))

Nearside Rear Coil spring corroded (5.3.1 (b) (i))

Nearside Rear Outer Nail in tyre tread.

Offside Front Inner Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Front Tyre slightly damaged/cracking or perishing tread cracking (5.2.3 (d) (ii))

Offside Rear Brake pipe corroded, covered in grease or other material Brake pipe corroded material wall thickness can not be determined. Strong advice replace ASAP. (1.1.11 (c))

Rear Upper Suspension component mounting prescribed area is corroded but not considered excessive subframe o/s + n/s (5.3.6 (a) (i))

fuel cap rubber seal deteriorated.

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))