2008 Ford Ka

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive floor near jacking point (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Nearside Front Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Nearside Rear Sub-frame pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Offside Front Seat belt webbing slightly damaged or frayed (7.1.2 (b) (ii))

Offside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Offside Rear Sub-frame pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Front Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Rear Axle swivel pins and bushes swivel pin and/or bush slightly worn (5.1.2 (b) (i))

Offside Rear Axle swivel pins and bushes swivel pin and/or bush slightly worn (5.1.2 (b) (i))

Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Front Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Rear Axle swivel pins and bushes swivel pin and/or bush slightly worn (5.1.2 (b) (i))

Offside Rear Axle swivel pins and bushes swivel pin and/or bush slightly worn (5.1.2 (b) (i))

Offside Rear Position lamp not working (4.2.1 (a) (ii))

Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

fuel filter corroded

Offside Rear Service brake excessively binding (1.2.1 (f))

Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))

Offside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

fuel filter corroded

Nearside Front Suspension spring mounting prescribed area is corroded but not considered excessive UNDER ARCH (5.3.6 (a) (i))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Suspension component pin or bush slightly worn AXEL BUSH (5.3.4 (a) (i))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Suspension component pin or bush slightly worn AXEL BUSH (5.3.4 (a) (i))

Nearside Front Suspension spring mounting prescribed area is corroded but not considered excessive UNDER ARCH (5.3.6 (a) (i))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Suspension component pin or bush slightly worn AXEL BUSH (5.3.4 (a) (i))

Offside Front Position lamp not working (4.2.1 (a))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Suspension component pin or bush slightly worn AXEL BUSH (5.3.4 (a) (i))

Nearside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e))

Offside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e))

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Front Sub-frame attachment bracket/mounting corroded and its strength is seriously reduced (2.4.G.1)

Offside Front Sub-frame attachment bracket/mounting corroded and its strength is seriously reduced (2.4.G.1)

Offside Front Brake hose twisted (found during steering lock to lock check) (2.2.D.2b)

Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Rear Stop lamp not working (1.2.1b)

advise underbody corroding

Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

advise underbody corroding

Engine covers fitted obscuring some components in the engine bay

Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Under-trays fitted obscuring some underside components

advise underbody and components corroding

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front coil spring incomplete (2.4.C.1a)