2009 Yamaha Yzf R125

Exhaust noisy (8.1.1 (a))

Front Brake pad(s) close to minimum limit (1.1.13 (a))

Front Steering headbearing has slight free play (2.2.2 (f) (i))

Front Tyre worn close to the legal limit (5.2.3 (e))

Fuel Tank Cover Loose.

Rear Brake disc worn, but not excessively (1.1.14 (a) (i))

Rear Drive chain slightly loose (6.1.7 (c) (i))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Rear Wheel bearing has slight play (5.1.3 (a) (i))

Front Stop lamp not working (4.3.1 (a) (ii))

Horn not working (7.7 (a))

Nearside Front Direction indicator not working (4.4.1 (a) (ii))

Exhaust noisy (8.1.1 (a))

Front Brake pad(s) close to minimum limit (1.1.13 (a))

Front Steering headbearing has slight free play (2.2.2 (f) (i))

Front Tyre worn close to the legal limit (5.2.3 (e))

Fuel Tank Cover Loose.

Rear Brake disc worn, but not excessively (1.1.14 (a) (i))

Rear Drive chain slightly loose (6.1.7 (c) (i))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Rear Wheel bearing has slight play (5.1.3 (a) (i))

Central Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Central Rear Suspension pin, bush or joint worn but not resulting in excessive movement (5.3.4 (a) (i))

Registration plate deteriorated but not likely to be misread (0.1 (b))

Front Tyre not fitted in accordance with side wall instructions (5.2.3 (i))

Front Tyre worn close to the legal limit (5.2.3 (e))

Registration plate deteriorated but not likely to be misread (0.1 (b))

Front Tyre worn close to the legal limit (5.2.3 (e))

Steering headbearing slightly stiff or notchy (2.2.2 (f) (i))

Front Brake binding but not excessively (1.2.1 (f))

Front Tyre worn close to the legal limit (5.2.3 (e))

Steering headbearing has slight free play (2.2.2 (f) (i))

Clutch lever shortened (6.2.7 (b))

Drive chain slightly loose (6.1.7 (c) (i))

Pillion seat slightly loose (6.2.6 (a) (ii))

Rear Brake pad(s) close to minimum limit (1.1.13 (a))

Rear Nail in tyre ()

Rear reflector missing (4.8.2 (a) (ii))

Registration plate lamp does not illuminate simultaneously with the position lamp(s) (4.7.2 (a))

Shock absorber has a serious fluid leak (5.3.2 (b))

Clutch lever shortened (6.2.7 (b))

Drive chain slightly loose (6.1.7 (c) (i))

Front Stop lamp emits other than a steady red light (4.3.3 (a) (i))

Pillion seat slightly loose (6.2.6 (a) (ii))

Rear Brake pad(s) close to minimum limit (1.1.13 (a))

Rear Nail in tyre ()

Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a))

Shock absorber has a serious fluid leak L/H (5.3.2 (b))

Shock absorber has a serious fluid leak R/H (5.3.2 (b))

Drive chain so loose it is likely to fail (6.1.7 (c) (ii)) DANGEROUS

Clutch lever shortened (6.2.7 (b))

Gear Lever bent

Rear light damaged but functions correctly

Stop lamp emits other than a steady red light Front lever switch (4.3.3 (a) (i))

Advise brake lever slightly bent.

Advise clutch lever pivot worn.

Advise light corrosion.

Advise numberplate light not working.

Horn not working (1.7.3a)

Steering headbearing has excessive free play (2.2.2)

Advise brake lever slightly bent.

Advise clutch lever pivot worn.

Advise light corrosion.

Advise numberplate light not working.

Clutch lever shortened. (6.2.1g)

Front Brake fluid reservoir fluid level low (3.2.B1d)

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Drive chain excessively loose (6.2.1d)

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Rear reflector on motorcycle missing (1.4.1)

Wheel alignment incorrect which adversely affects the steering (2.5.1)

Clutch lever shortened. (6.2.1g)

Front Brake fluid reservoir fluid level low (3.2.B1d)

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Handlebar deformed (2.1.1b)

Front Headlamp aim too high (1.6)

Nearside Front Front shock absorber seal failed and leaking oil (2.3.3)

Offside Front Front shock absorber seal failed and leaking oil (2.3.3)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Front Front shock absorber has light misting of stanchion (2.3.3)

Rear Brake disc(s) has slight run out (3.2.A1m)