2012 Mercedes-benz Vito

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Supplementary restraint system warning lamp indicates a fault (7.1.6 (a))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Rear Direction indicator slightly discoloured (4.4.3 (a))

Offside Rear Direction indicator slightly discoloured (4.4.3 (a))

Tyre worn close to legal limit/worn on edge all tyres (5.2.3 (e))

Front Outer Tyre worn close to legal limit/worn on edge BOTH (5.2.3 (e))

Offside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Front Brake disc worn, pitted or scored, but not seriously weakened Both fronts (1.1.14 (a) (ii))

Front Outer Tyre worn close to legal limit/worn on edge Both fronts (5.2.3 (e))

Nearside Rear Inner Tyre worn close to legal limit/worn on edge Inner and outer (5.2.3 (e))

Oil leak, but not excessive (8.4.1 (a) (i))

Coolant leak ()

diff mount bushies worn

Brake pedal has insufficient reserve travel (1.1.2 (a))

Exhaust emissions exceed manufacturer's specified limit (8.2.2.2 (a))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Rear Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Coolant leak ()

diff mount bushies worn

Brake pipe excessively corroded both front to rear (1.1.11 (c))

Nearside Front Suspension arm pin or bush excessively worn (5.3.4 (a) (i))

Offside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))

Offside Front Outer Brake pipe excessively corroded (1.1.11 (c))

Offside Front Suspension arm pin or bush excessively worn (5.3.4 (a) (i))

Rear Axle swivel pins and bushes swivel pin and/or bush excessively worn both rear axle bushes (5.1.2 (b) (i))

Front Inner Brake disc in such a condition that it is seriously weakened (1.1.14 (a) (ii)) DANGEROUS

Offside Front fog lamp out

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

eng oil leak

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Rear fog lamp not working (4.5.1 (a) (ii))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Front Outer Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Front Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Offside Front Outer Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Offside Front Headlamp not working on dipped beam HIGH BEAM INOP (4.1.1 (a) (ii))

Rear Exhaust system insecure (6.1.2 (a))

Service brake lagging in operation (1.2.1 (d))

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement front (2.4.G.2)

Nearside Front Tyre worn close to the legal limit edges (4.1.E.1)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement front (2.4.G.2)

Rear diff bushes deteriorated all

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

Front registration plate deteriorated but not likely to be misread (6.3.1d)

Front registration plate deteriorated but not likely to be misread (6.3.1d)

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Suspension arm synthetic bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords cut outer sidewalls (4.1.D.1a)

Front Windscreen washer provides insufficient washer liquid (8.2.3)

Nearside Headlamp aim too high (1.8)