2001 Mercedes-benz C

handbrake travel

Front wheel bearing has slight play both (2.5.A.3c)

Rear Brake pad(s) wearing thin (3.5.1g)

Front Brake pad(s) less than 1.5 mm thick both (3.5.1g)

Nearside Front Suspension arm has excessive play in a ball joint (2.4.G.2)

Rear Tie bar/rod rubber bush deteriorated resulting in excessive movement both (2.4.G.2)

Exhaust has a minor leak of exhaust gases (7.1.2)

Offside Front Lower Suspension arm has excessive play in a ball joint rear (2.4.G.2)

Exhaust has a minor leak of exhaust gases (7.1.2)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

engine covers and under trays fitted oil leak

Engine covers fitted obscuring some components in the engine bay

Exhaust has a minor leak of exhaust gases (7.1.2)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Oil leak

Rear Direction indicators slightly discoloured (1.4.A.2f)

Tyre worn close to the legal limit (4.1.E.1)

Under-trays fitted obscuring some underside components

Both front brake hose are close to strut during lock to lock chek, but have a clear space between them

Engine covers fitted obscuring some components in the engine bay

O/S/F tyre is wearing on inner edge

Offside Rear Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Play in steering rack inner joint(s)

Rear Direction indicators slightly discoloured (1.4.A.2f)

Under-trays fitted obscuring some underside components

Windscreen has a sticker that goes into zone A but when sat in seat the view affected is in the bonnet direction and not a dirrect view of the road.

Engine covers fitted obscuring some components in the engine bay

Nearside Rear Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Oil leak

Under-trays fitted obscuring some underside components

air filter housing loose

Nearside Front coil spring incomplete (2.4.C.1a)

Offside Front Lower Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Offside Front coil spring incomplete (2.4.C.1a)

Offside Headlamp aim too low (1.8)

Brake pedal rubber worn on side

Nearside Rear Brake pad(s) wearing thin (3.5.1g)

Play in front wheel bearings

Play in o/s/f steering arm

Suspension arm has excessive play in a pin/bush (2.4.G.2)

Windscreen washer provides insufficient washer liquid (8.2.3)

Nearside Rear Brake pad(s) less than 1.5 mm thick (3.5.1g) DANGEROUS

Nearside Rear brake disc excessively scored (3.5.1h) DANGEROUS

Nearside Front Torque/reaction arm has a slightly deteriorated synthetic bush (2.4.G.2)

Nearside Front wheel bearing has slight play (2.5.A.3c)

Offside Front Torque/reaction arm has a slightly deteriorated synthetic bush (2.4.G.2)

Offside Front Track rod end ball joint has slight play (2.2.B.1f)

Offside Front wheel bearing has slight play (2.5.A.3c)

Park brake pedal has very little reseve travel, RBT efficiency results ok

Nearside Rear Direction indicator incorrect colour (1.4.A.2f)

Offside Rear Direction indicator incorrect colour (1.4.A.2f)

Offside Side repeater not working (1.4.A.2c)

Nearside Rear coil spring corroded so that its cross sectional area is reduced and seriously weakened (2.4.C.1b) DANGEROUS

Offside Rear coil spring corroded so that its cross sectional area is reduced and seriously weakened (2.4.C.1b) DANGEROUS

Nearside Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front Torque/reaction arm has a slightly deteriorated synthetic bush (2.4.G.2)

Nearside Front wheel bearing has slight play (2.5.A.3c)

Nearside Headlamp aim too high (1.8)

Offside Front Brake pad(s) wearing thin (3.5.1g)

Offside Front Torque/reaction arm has a slightly deteriorated synthetic bush (2.4.G.2)

Offside Front Track rod end ball joint has slight play (2.2.B.1f)

Offside Front wheel bearing has slight play (2.5.A.3c)

Offside Headlamp aim too high (1.8)

Park brake pedal has very little reseve travel, RBT efficiency results ok

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)