2003 Toyota Yaris

Front Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Front Headlamp lens slightly defective both side (4.1.1 (b) (i))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

general corrosion under the body

parking brake excessive travel

rear sills are corroded

Front Headlamp has a product on the lens but not seriously reducing light output both side (4.1.4 (b))

Front Inner Track rod end ball joint has slight play both side (2.1.3 (b) (i))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

general corrosion under the body

parking brake excessive travel needs some adjustment or repair

rear sills are corroded

Front Shock absorbers has light misting of oil (both sides) (5.3.2 (b))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Front Headlamp aim projected beam image is obviously incorrect both front headlamps (4.1.2 (c))

Front Headlamp aim too high both front headlamps (4.1.2 (a))

Rear Exhaust has a major leak of exhaust gases rear exhaust (6.1.2 (a))

Rear Rear fog lamp not working (4.5.1 (a) (ii))

Nearside Front Anti-roll bar linkage pin or bush likely to become detached (5.3.4 (a) (ii)) DANGEROUS

Offside Front Anti-roll bar linkage pin or bush likely to become detached (5.3.4 (a) (ii)) DANGEROUS

eml on

Brake pedal creeps down while the pedal is held under pressure (3.3.B.1a)

Front Brakes imbalanced across an axle Axle 1 (3.7.B.5b)

Nearside Front Headlamp not working on dipped beam (1.7.5a)

Nearside Rear Parking brake recording little or no effort (3.7.D.3a)

Offside Front position lamp(s) not working (1.1.A.3b)

Rear Brakes imbalanced across an axle Axle 2 (3.7.B.5b)

eml on

Front registration plate deteriorated (6.3.1d)

Offside Rear Tyre tread depth below requirements of 1.6mm feathering (4.1.E.1)

Offside Stop lamp not working (1.2.1b)

EML ON

Front registration plate cracked

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Front Exhaust system not adequately supported (7.1.1)

Front brake disc in such a condition that it is seriously weakened (3.5.1i)

Nearside Front Anti-roll bar linkage has excessive play in a pin/bush (2.4.G.2)

Parking brake lever has no reserve travel (3.1.6b)

EML ON

Front registration plate cracked

Front registration plate deteriorated but not likely to be misread (6.3.1d)

Nearside Headlamp has a product on the lens but not seriously reducing light output (1.7.5a)

Offside Headlamp has a product on the lens but not seriously reducing light output (1.7.5a)

Nearside Front Anti-roll bar rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Offside Front Anti-roll bar rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Front registration plate deteriorated but not likely to be misread (6.3.1d)

Nearside Headlamp has a product on the lens but not seriously reducing light output (1.7.5a)

Offside Headlamp has a product on the lens but not seriously reducing light output (1.7.5a)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front position lamp(s) not working (1.1.A.3b)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Nearside rear brake binding (3.7.B.1)

Offside rear brake binding (3.7.B.1)

Registration plate lamp not working (1.1.C.1d)

Nearside Front Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Front Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)