MOT Status
ExpiredMileage
133,348 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Offside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Offside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii))
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Front Registration plate deteriorated but not likely to be misread (0.1 (b))
Nearside Outer Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))
Offside Front Anti-roll bar linkage ball joint has slight play gaitor split (5.3.4 (a) (i))
Offside Rear Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))
Rear Registration plate deteriorated but not likely to be misread (0.1 (b))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Front Registration plate deteriorated but not likely to be misread (0.1 (b))
Front Windscreen wiper blade defective (3.4 (b) (i))
Nearside Front Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Anti-roll bar ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Rear Exhaust mount slightly insecure
Rear Registration plate deteriorated but not likely to be misread (0.1 (b))
Rear subframe corrosion
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Front Registration plate deteriorated but not likely to be misread (0.1 (b))
Front Windscreen wiper blade defective (3.4 (b) (i))
Nearside Front Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Anti-roll bar ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Offside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Offside Rear Stop lamp(s) not working (4.3.1 (a) (ii))
Rear Exhaust mount slightly insecure
Rear Registration plate deteriorated but not likely to be misread (0.1 (b))
Rear subframe corrosion
Brake pedal wearing smooth (1.1.2 (c))
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Offside Rear Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Suspension component mounting prescribed area is corroded but not considered excessive rear subframe mounting and suspension components (5.3.6 (a) (i))
Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Nearside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Headlamp not working on dipped beam (1.7.5a)
Nearside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)
Nearside Rear Nail in tyre ()
slight corrosion to n/s and o/s inner sills
Nearside Front Suspension arm has excessive play in a pin/bush rear (2.4.G.2)
Offside Front Suspension arm has excessive play in a ball joint (2.4.G.2)
Offside Front Suspension arm has excessive play in a pin/bush rear (2.4.G.2)
slight corrosion to n/s and o/s inner sills
Nearside Front Suspension arm synthetic bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front suspension has slight movement at a wishbone pin or bush (2.5.A.1c)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Front suspension has slight movement at a wishbone pin or bush (2.5.A.1c)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nail in nearside rear tyre
Nail in offside rear tyre
brake disc slightly pitted (3.5.1h)
How Reliable is the Mazda 3?
Based on 2,040,939 MOT tests across 164,053 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
CA56 AZF is a 2006 Mazda 3 in Blue with a 1,598cc petrol engine. This vehicle has been through 20 MOT tests with a personal pass rate of 70%.
Across all 2006 Mazda 3 models, the average MOT pass rate is 74.6% with a typical mileage of 70,278 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mazda 3 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 40,716 recorded failures. If you're considering buying CA56 AZF, it's worth having these areas checked by a mechanic before committing.
The Mazda 3 typically stays on UK roads for around 22 years. At 20 years old, this Mazda 3 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of CA56 AZF?
You can check the full history of CA56 AZF by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was CA56 AZF registered?
CA56 AZF is a 2006 Mazda 3, first registered on 29 November 2006.
Is CA56 AZF safe to buy?
The MOT history for CA56 AZF shows 20 tests with a 70% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does CA56 AZF have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on CA56 AZF. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.