2007 Volkswagen Polo

Front Windscreen washer provides insufficient washer liquid (3.5 (a))

Nearside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) DANGEROUS

Offside Rear Service brake binding but not excessively (1.2.1 (f))

handbrake travel

Central Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Front Brake disc worn, but not excessively Brake pad depth 5-6mm (1.1.14 (a) (i))

Offside Front Play in steering rack inner joint(s) ()

Rear Brake cable damaged but not to excess Both sides (1.1.15 (a))

Rear axle corroded

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Central Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Nearside Rear Position lamp with a multiple light source up to 1/2 not functioning (4.2.1 (a) (i))

Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Nearside Rear shock absorber shroud broken

Offside Rear Service brake binding but not excessively (1.2.1 (f))

front suspension corroded

fuel filler cap outer cover broken

rear exhaust starting to corrode

Nearside Front Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Offside Front Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Offside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Front Suspension arm corroded and seriously weakened (5.3.3 (b) (i))

Offside Front Upper Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Central Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Nearside Rear Position lamp with a multiple light source up to 1/2 not functioning (4.2.1 (a) (i))

Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Nearside Rear shock absorber shroud broken

Offside Rear Service brake binding but not excessively (1.2.1 (f))

front suspension corroded

fuel filler cap outer cover broken

rear exhaust starting to corrode

Nearside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Offside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Offside Front Upper Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Headlamp levelling device inoperative (4.1.5 (a))

Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Offside Front Suspension arm likely to fail (5.3.3 (b) (ii)) DANGEROUS

Nearside Front Shock absorbers has slight external damage to the casing corroded (5.3.2 (b))

Nearside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Offside Front Shock absorbers has slight external damage to the casing corroded (5.3.2 (b))

Outer petrol flap is broke

Rear Exhaust silencer slightly loose outer skin coming away (8.1.1 (b) (i))

Nearside Front Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Nearside Front wing mirror has slight damage

Outer petrol flap is broke

Outer petrol flap is broke

Nearside Front Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Nearside Front wing mirror has slight damage

Offside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e))

Direction indicator slightly discoloured x2 rears (1.4.A.2f)

Nearside Front Shock absorber has a light misting of oil (2.7.3)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Front Shock absorber has a light misting of oil (2.7.3)

Outer petrol cap is broken

front exhaust flexi pipe is broke

Nearside Front Body has a sharp edge caused by damage wing mirror lens missing (6.1.C.1)

Nearside Rear Registration plate lamp not working (1.1.C.1d)

Nearside Rear Shock absorber has an excessively worn shock absorber pivot (2.7.4)

Direction indicator slightly discoloured x2 rears (1.4.A.2f)

Nearside Front Shock absorber has a light misting of oil (2.7.3)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Front Shock absorber has a light misting of oil (2.7.3)

Outer petrol cap is broken

front exhaust flexi pipe is broke

outer petrol flap broken

under trays

Nearside rear brake binding (3.7.B.1)

Offside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords and has a nail in tread (4.1.D.1a)

Offside Rear Tyre tread depth below requirements of 1.6mm 165/70/14 (4.1.E.1)

Offside rear brake binding (3.7.B.1)

Rear Brakes imbalanced across an axle (3.7.B.5b)

Parking brake lever has little reserve travel (3.1.6b)

outer petrol flap broken

under trays

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Rear position lamp(s) has light sources not illuminating, but not more than 50% (1.1.A.3b)

Under-trays fitted obscuring some underside components

Brakes imbalanced across an axle (3.7.D.2c)

Nearside Front Lower Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Offside Front Lower Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Offside Front Upper Anti-roll bar linkage ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Nearside Rear position lamp(s) has light sources not illuminating, but not more than 50% (1.1.A.3b)

Under-trays fitted obscuring some underside components

Long handbrake travel

Under-trays fitted obscuring some underside components

Non obligatory mirror damaged

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Non obligatory mirror damaged