2006 Nissan Micra

Nearside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Offside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Front Hydraulic brake calliper insecurely mounted Calliper securing bolt loose (1.1.16 (c) (i))

Offside Front Upper Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Headlamp aim unable to be tested (4.1.2 (b))

Offside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Offside Headlamp not working on main beam (4.1.1 (a) (ii))

Nearside Front Lower Suspension arm ball joint likely to become detached Ball joint securing nut and bolt is loose (5.3.4 (a) (ii)) DANGEROUS

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))

Exhaust carbon monoxide content at idle exceeds manufacturer's specified limits (8.2.1.2 (b))

Supplementary restraint system warning lamp indicates a fault (7.1.6 (a))

Nearside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. offside low (1.2.1 (b) (i))

Front Sub-frame pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Anti-roll bar linkage ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Offside Rear Stop lamp not working (1.2.1b)

Nearside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)

exhaust system corroded

Nearside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Nearside Rear wheel bearing rough when rotated (2.6.1)

Nearside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

exhaust system corroded

exhaust system becoming corroded

Driver's airbag obviously defective (5.4.1)

Nearside Headlamp aim too high (1.8)

Offside Front Road wheel bead rim badly distorted (4.2.A.1a)

Nearside Rear Road wheel with a slightly distorted bead rim (4.2.A.1a)

srs lamp flashing

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)

Nearside Headlamp aim too high (1.8)

Offside Headlamp aim too high (1.8)