MOT Status
ExpiredMileage
70,831 miAbove average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
slight oil leak
slight play both rear wheel bearings
Front Brakes imbalanced across an axle Axle 1 (3.7.B.5b)
Nearside Front front brake recording little or no effort (3.7.B.5a)
slight oil leak
slight play both rear wheel bearings
Nearside Front wheel bearing has slight play (2.5.A.3c)
Offside Front Upper Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
doors alinement
Headlamp aim beam image kick up to the offside (1.8)
Indicator tell tale inoperative (1.4.A.2a)
Nearside Front Direction indicator not working (1.4.A.2c)
Nearside Headlamp aim too high (1.8)
Nearside Headlamp not working on main beam (1.7.5a)
Nearside Rear position lamp(s) not working (1.1.A.3b)
Nearside Stop lamp not working (1.2.1b)
Offside Headlamp aim too high (1.8)
Offside Rear position lamp(s) not working (1.1.A.3b)
Offside Stop lamp not working (1.2.1b)
Registration plate lamp not working (1.1.C.1d)
Offside Front Upper Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
doors alinement
Nearside Front Upper Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Upper Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
rear brake pipes corroded.
Bonnet cannot be secured in the closed position (8.4.1)
Bootlid cannot be secured in the closed position (6.4.1)
Front passenger door does not latch securely closed (6.2.B.1a)
Fuel system component leaking (7.2.3)
Nearside Front Direction indicator not working (1.4.A.2c)
Nearside Front Seat belt anchorage prescribed area is inadequately repaired (5.2.6)
Nearside Front Statutory seat belt missing (5.1.1)
Nearside Front position lamp(s) not working (1.1.A.3b)
Nearside Headlamp aim too high (1.8)
Nearside Headlamp not working on main beam (1.7.5a)
Nearside Rear Suspension component mounting prescribed area is inadequately repaired (2.4.A.3)
Nearside Rear position lamp(s) not working (1.1.A.3b)
Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Front Seat belt anchorage prescribed area is inadequately repaired (5.2.6)
Offside Front Statutory seat belt missing (5.1.1)
Offside Front position lamp(s) not working (1.1.A.3b)
Offside Headlamp aim too high (1.8)
Offside Headlamp not working on main beam (1.7.5a)
Offside Rear Suspension component mounting prescribed area is inadequately repaired (2.4.A.3)
Offside Rear position lamp(s) not working (1.1.A.3b)
Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside front brake recording little or no effort (3.7.B.5a)
Rear Registration plate lamp not working (1.1.C.1d)
Windscreen has damage to the swept area in excess of a 40mm circle outside zone 'A' (8.3.1d)
Windscreen washer provides insufficient washer liquid (8.2.3)
front brake application uneven (3.7.B.2)
front brakes release unevenly (3.7.B.4)
Brakes imbalanced across an axle (3.7.B.5b) DANGEROUS
Nearside Front Upper Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Upper Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
rear brake pipes corroded.
n/s floor surface corrosion not in prescribed area
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Windscreen washer provides insufficient washer liquid (8.2.3)
Offside Windscreen washer provides insufficient washer liquid (8.2.3)
n/s floor surface corrosion not in prescribed area
Brake pedal anti-slip provision worn smooth (3.3.A.1b)
Brake pedal creeps down when held under pressure (3.3.B.1a)
Brake pedal spongy (3.3.B.1b)
Offside Steering pivot point has excessive play (2.2.B.1g)
Brake pedal anti-slip provision worn smooth (3.3.A.1b)
Driver's door does not latch securely closed (6.2.B.1a)
Front passenger door does not latch securely closed (6.2.B.1a)
Nearside Front Direction indicator incorrect colour (1.4.A.2f)
Nearside Front Side repeater not working (1.4.A.2c)
Nearside Front Tyre has a lump, caused by separation or partial failure of its structure (4.1.D.1b)
Nearside Headlamp not in good working order adversely affecting beam image (1.2.4a)
Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)
Offside Front Direction indicator incorrect colour (1.4.A.2f)
Offside Front Tyre has a lump, caused by separation or partial failure of its structure (4.1.D.1b)
Offside Front wheel bearing has excessive play (2.5.A.3c)
Offside Headlamp not in good working order adversely affecting beam image (1.2.4a)
Parking brake: efficiency below requirements (3.7.B.7) DANGEROUS
Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)
Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
How Reliable is the Fiat 500?
Based on 3,854,072 MOT tests across 331,691 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
CBY 442G is a 2008 Fiat 500 in Blue with a 498cc petrol engine. This vehicle has been through 12 MOT tests with a personal pass rate of 50%.
Across all 2008 Fiat 500 models, the average MOT pass rate is 71.7% with a typical mileage of 57,692 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Fiat 500 fails its MOT is shock absorber has an excessively worn bush, accounting for 26,240 recorded failures. If you're considering buying CBY 442G, it's worth having these areas checked by a mechanic before committing.
The Fiat 500 typically stays on UK roads for around 18 years. At 18 years old, this Fiat 500 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of CBY 442G?
You can check the full history of CBY 442G by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was CBY 442G registered?
CBY 442G is a 2008 Fiat 500, first registered on 23 April 2008.
Is CBY 442G safe to buy?
The MOT history for CBY 442G shows 12 tests with a 50% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does CBY 442G have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on CBY 442G. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.