2003 Toyota Land Cruiser

Headlamp lens slightly defective both headlamps fogged (4.1.1 (b) (i))

Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Towball/hitch not fitted at time of test ()

Exhaust has a major leak of exhaust gases silencer blowing (6.1.2 (a))

Nearside Stop lamp(s) not working (4.3.1 (a) (ii))

Offside Rear Position lamp not working (4.2.1 (a) (ii))

Headlamp lens slightly defective both headlamps fogged (4.1.1 (b) (i))

Offside Rear Position lamp insecure (4.2.1 (c) (i))

Passenger seat(s) missing at time of test all rear seats ()

Exhaust emissions exceed manufacturer's specified limit (8.2.2.2 (a))

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis leg at lower wishbone mount (5.3.6 (a) (i))

Nearside Rear Service brake excessively binding (1.2.1 (f))

Offside Front Brake pipe excessively damaged to hose (1.1.11 (c))

Passenger seat(s) missing at time of test all rear seats ()

Nearside Rear Service brake binding but not excessively (1.2.1 (f))

Nearside parking brake efficiency low

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Passenger seat(s) missing at time of test ()

Nearside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Nearside Rear Service brake excessively binding (1.2.1 (f))

Offside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Front Service brake excessively binding (1.2.1 (f))

Offside Rear Position lamp not working (4.2.1 (a) (ii))

Offside Stop lamp(s) not working (4.3.1 (a) (ii))

Parking brake lever has excessive movement indicating incorrect adjustment (1.1.6 (c))

Nearside parking brake efficiency low

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Passenger seat(s) missing at time of test ()

Front Headlamp lens slightly defective nearside and offside (4.1.1 (b) (i))

Nearside Rear Service brake binding but not excessively (1.2.1 (f))

Rear Coil spring corroded nearside and offside (5.3.1 (b) (i))

Rear Suspension arm pin or bush worn but not resulting in excessive movement nearside and offside / trailing arm (5.3.4 (a) (i))

Rear nearside and offside shock absorber corroded

Front Tyre slightly damaged/cracking or perishing nearside and offside (5.2.3 (d) (ii))

Offside Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Rear Coil spring corroded nearside and offside (5.3.1 (b) (i))

Rear Lower Suspension component pin or bush slightly worn nearside and offside trailing arm (5.3.4 (a) (i))

Rear Tyre slightly damaged/cracking or perishing nearside and offside (5.2.3 (d) (ii))

Nearside Front Headlamp aim not tested (4.1.2 (b))

Nearside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis leg (5.3.6 (a) (i))

Front Headlamp lens slightly defective nearside and offside (4.1.1 (b) (i))

Front Tyre slightly damaged/cracking or perishing nearside and offside (5.2.3 (d) (ii))

Offside Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Rear Coil spring corroded nearside and offside (5.3.1 (b) (i))

Rear Lower Suspension component pin or bush slightly worn nearside and offside trailing arm (5.3.4 (a) (i))

Rear Tyre slightly damaged/cracking or perishing nearside and offside (5.2.3 (d) (ii))

Rear Lower Suspension component pin or bush slightly worn NEARSIDE AND OFFSIDE TRAILING ARM BUSHES (5.3.4 (a) (i))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength CHASSIS LEG (5.3.6 (a) (i))

Rear Lower Suspension component pin or bush slightly worn NEARSIDE AND OFFSIDE TRAILING ARM BUSHES (5.3.4 (a) (i))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Rear Suspension component mounting prescribed area is corroded but not considered excessive CROSS MEMBER (5.3.6 (a) (i))

Offside Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Rear Brake pad(s) wearing thin (3.5.1g)

Nearside Rear Stop lamp not working (1.2.1b)

Offside Rear Brake pad(s) wearing thin (3.5.1g)

Rear Registration plate lamp insecure (1.1.C.1c)

noise from rear suspension

Front front brake application uneven (3.7.B.2)

brake pedal travel

Nearside Inner Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Nearside Front suspension has excessive play in a lower suspension ball joint (2.5.B.1a)

Nearside Headlamp not working on dipped beam (1.7.5a)