2003 Ford Ka

Offside Rear Axle swivel joint has slight movement between a swivel joint and its housing (2.5.A.1b)

Nearside Front Anti-roll bar has excessive play in a pin/bush (2.4.G.2)

Nearside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Rear coil spring broken (2.4.C.1a)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Front Suspension arm has excessive play in a pin/bush (2.4.G.2)

Offside Rear coil spring broken (2.4.C.1a)

Steering wheel in a condition that hampers proper control (2.1.1)

Offside Rear Axle swivel joint has slight movement between a swivel joint and its housing (2.5.A.1b)

Front Road wheel with a slightly distorted bead rim (4.2.A.1a)

both front strut mounts becoming worn

both rear axle beam mounts becoming worn

os sill becoming corroded

Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Registration plate lamp not working (1.1.C.1d)

Front Road wheel with a slightly distorted bead rim (4.2.A.1a)

both front strut mounts becoming worn

both rear axle beam mounts becoming worn

os sill becoming corroded

Damage to o/s/f wheel rim

Fuel cap/sealing device does not fasten securely maintaining the sealing arrangement (7.2.4b)

Nearside Front Brake hose has insufficient room to move, resulting in fouling on any part (3.6.B.4a)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Brake hose has insufficient room to move, resulting in fouling on any part (3.6.B.4a)

Offside Front Lower Suspension arm has excessive play in a pin/bush (2.4.G.2)

Offside Rear position lamp(s) not working (1.1.A.3b)

Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone 'A' (8.3.1e)

Damage to o/s/f wheel rim

Front Steering column top bearing slightly worn (2.1.2c)

Nearside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)

Exhaust has part of the system slightly deteriorated (7.1.1a)

Nearside Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front Macpherson strut has slight movement in the upper support bearing assembly (2.5.B.1b)

Offside Front Brake pad(s) wearing thin (3.5.1g)

Offside Front Macpherson strut has slight movement in the upper support bearing assembly (2.5.B.1b)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Stop lamp not working (1.2.1b)

Nearside Front Macpherson strut has slight movement in the upper support bearing assembly (2.5.B.1b)

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Front Macpherson strut has slight movement in the upper support bearing assembly (2.5.B.1b)

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

both rear tyres perished

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

front brake application uneven (3.7.B.2)