MOT Status
ExpiredMileage
92,144 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Central Rear fog lamp not working (4.5.1 (a) (ii))
Emissions unable to be completed (8.2.1.2 (d))
Exhaust noise is clearly in excess of that emitted by a similar vehicle fitted with a standard silencer in average condition (8.1.1 (a))
Nearside Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Nearside Rear Subframe mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))
Offside Front Lower Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))
Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill (7.1.1 (a) (i))
Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Offside Rear Service brake lagging in operation (1.2.1 (d))
Rear Exhaust has a major leak of exhaust gases (6.1.2 (a))
Brake master cylinder/servo mounting prescribed area is corroded but not considered excessive (1.1.21 (e) (i))
Central Front Power steering pipe/hose has slight seepage back of engine (2.1.5 (a))
Front Integral body structure is corroded but structural rigidity is not significantly reduced chassis rails/strut top mounting area N/S/F and O/S/F (6.1.1 (c) (i))
Offside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Front Brake prescribed area is corroded but not considered excessive bulkhead (1.1.21 (e) (i))
Offside Front Integral body structure is corroded but structural rigidity is not significantly reduced rail/structure drivers foot well (6.1.1 (c) (i))
Offside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Offside Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))
Offside wiper linkage worn
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Subframe mounting prescribed area is corroded but not considered excessive N/S/R and O/S/R (5.3.6 (a) (i))
Rear heatshield not fully secure
Brake pipe corroded, covered in grease or other material pipes to rear (1.1.11 (c))
Fuel tank slightly loose mounting strap corroded (6.1.3 (a) (i))
Nearside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Nearside Oil leak, but not excessive (8.4.1 (a) (i))
Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Front Macpherson strut corroded but not seriously weakened (5.3.3 (b) (i))
Offside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Offside Front suspect corrosion under under seal os sill
Offside Rear Shock absorbers has a reduced damping effect (5.3.2 (d))
Offside Rear Shock absorbers has light misting of oil (5.3.2 (b))
Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))
Exhaust carbon monoxide content at idle exceeds default limits (8.2.1.2 (b))
Brake pipe corroded, covered in grease or other material pipes to rear (1.1.11 (c))
Fuel tank slightly loose mounting strap corroded (6.1.3 (a) (i))
Nearside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Nearside Oil leak, but not excessive (8.4.1 (a) (i))
Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Front Macpherson strut corroded but not seriously weakened (5.3.3 (b) (i))
Offside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Offside Front suspect corrosion under under seal os sill
Offside Rear Shock absorbers has a reduced damping effect (5.3.2 (d))
Offside Rear Shock absorbers has light misting of oil (5.3.2 (b))
Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Nearside Front Coil spring fractured or broken (5.3.1 (b) (i))
Nearside Front Position lamp not working (4.2.1 (a) (ii))
Nearside Rear Position lamp not working (4.2.1 (a) (ii))
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i))
Nearside Rear Stop lamp(s) not working (4.3.1 (a) (ii))
Offside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))
Offside Seat belt anchorage prescribed area strength or continuity significantly reduced seat mountings (7.1.1 (a) (i))
Rear Service brake lagging in operation (1.2.1 (d))
Front Oil leak, but not excessive (8.4.1 (a) (i))
Fuel tank slightly loose mounting strap corroded (6.1.3 (a) (i))
Nearside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Front Macpherson strut corroded but not seriously weakened (5.3.3 (b) (i))
Offside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Offside Front suspect corrosion under under seal os sill
Offside Rear Shock absorbers has a reduced damping effect (5.3.2 (d))
Offside Rear Shock absorbers has light misting of oil (5.3.2 (b))
Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Rear Brake pipe corroded, covered in grease or other material pipes to rear (1.1.11 (c))
center exhaust heat shield loose
Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Position lamp slightly affected by the operation of another lamp flashes when indicator on (4.2.3 (c))
Rear Brake pipe corroded, covered in grease or other material pipes to rear (1.1.11 (c))
Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))
Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))
Rear Rear fog lamp not working (4.5.1 (a) (ii))
Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Position lamp slightly affected by the operation of another lamp flashes when indicator on (4.2.3 (c))
Rear Brake pipe corroded, covered in grease or other material pipes to rear (1.1.11 (c))
Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))
center exhaust heat shield loose
Brake master cylinder/servo mounting prescribed area is corroded but not considered excessive (1.1.21 (e) (i))
Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))
Nearside Front Suspension arm pin or bush excessively worn wishbone rubber bush (5.3.4 (a) (i))
Nearside Stop lamp(s) not working (4.3.1 (a) (ii))
Offside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis leg in floor (6.1.1 (c) (i))
Offside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Offside Front Suspension arm pin or bush excessively worn wishbone rubber bush (5.3.4 (a) (i))
Offside Front Upper Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Rear Exhaust has a major leak of exhaust gases (6.1.2 (a))
Rear Exhaust system insecure (6.1.2 (a))
Brake load sensing valve seized and ABS not fitted or inoperative (1.1.17 (c) (ii)) DANGEROUS
Brake master cylinder/servo mounting prescribed area is corroded but not considered excessive (1.1.21 (e) (i))
Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Rear Brake pipe corroded, covered in grease or other material N/S/R and O/S/R (1.1.11 (c))
Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Offside Front Lower Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Brake pipe slightly corroded both over fuel tank (3.6.B.2c)
Offside Front Brake pipe slightly corroded (3.6.B.2c)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Rear Trailing arm corroded but not seriously weakened (2.4.G.1)
Shock absorber has slight corrosion to the casing both rear (2.7.2a)
Brake pipe slightly corroded both over fuel tank (3.6.B.2c)
Nearside Registration plate lamp not working (1.1.C.1d)
Offside Front Brake pipe slightly corroded (3.6.B.2c)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Rear Trailing arm corroded but not seriously weakened (2.4.G.1)
Shock absorber has slight corrosion to the casing both rear (2.7.2a)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
off side rear tyre beginning to crack on tyre wall
Brake pipe excessively corroded center (3.6.B.2c)
Supplementary Restraint System warning lamp indicates a fault (5.4.2)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
off side rear tyre beginning to crack on tyre wall
Brakes imbalanced across an axle (3.7.B.5b)
Nearside rear brake recording little or no effort (3.7.B.5a)
Rear Brakes imbalanced across an axle (3.7.B.5b)
Rear fog lamp not working (1.3.2b)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Rear Brake load sensing valve stiff (3.6.E.3)
Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)
Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
Brake load sensing valve linkage stiff (3.6.E.3)
Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)
Front Exhaust has a minor leak of exhaust gases (7.1.2)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
both rear tyres are slightly perished and starting to crack
Centre Exhaust has a minor leak of exhaust gases (7.1.2)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Suspension arm has excessive play in a ball joint (2.4.G.2)
Centre Exhaust has a minor leak of exhaust gases (7.1.2)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
How Reliable is the Peugeot 206?
Based on 9,831,622 MOT tests across 644,158 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
CE03 ZYG is a 2003 Peugeot 206 in Silver with a 1,360cc petrol engine. This vehicle has been through 26 MOT tests with a personal pass rate of 65.4%.
Across all 2003 Peugeot 206 models, the average MOT pass rate is 68.8% with a typical mileage of 62,409 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Peugeot 206 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 446,851 recorded failures. If you're considering buying CE03 ZYG, it's worth having these areas checked by a mechanic before committing.
The Peugeot 206 typically stays on UK roads for around 28 years. At 23 years old, this Peugeot 206 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of CE03 ZYG?
You can check the full history of CE03 ZYG by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was CE03 ZYG registered?
CE03 ZYG is a 2003 Peugeot 206, first registered on 31 March 2003.
Is CE03 ZYG safe to buy?
The MOT history for CE03 ZYG shows 26 tests with a 65.4% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does CE03 ZYG have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on CE03 ZYG. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.