MOT Status
ExpiredMileage
96,226 miAbove average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Brake performance not tested (1.2.1 (g))
Nearside Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Nearside Rear Body component damaged and likely to cause injury Light unit (6.2.1 (a) (i))
Nearside Rear Position lamp not working (4.2.1 (a))
Nearside Rear Stop lamp(s) not working (4.3.1 (a) (ii))
Nearside Rear Suspension arm corroded and seriously weakened spring plate (5.3.3 (b) (i))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))
Offside Front Brake pipe excessively corroded (1.1.11 (c))
Offside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt front arm (5.3.4 (b) (ii))
Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Offside Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Offside Rear Suspension arm corroded and seriously weakened spring plate (5.3.3 (b) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))
Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement tie rod (5.3.4 (a) (i))
Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement tie rod (5.3.4 (a) (i))
Nearside Front Seat belt anchorage prescribed area is corroded but not considered excessive outer sill (5.2.6)
general all round corrosion
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Rear Inner Suspension component mounting prescribed area is excessively corroded sill/chassis (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is excessively corroded outer sill (2.4.A.3)
Offside Rear Outer Suspension component mounting prescribed area is excessively corroded sill (2.4.A.3)
Nearside Front Seat belt anchorage prescribed area is corroded but not considered excessive outer sill (5.2.6)
general all round corrosion
Front Brake pad(s) wearing thin (3.5.1g)
Nearside Front Front position lamp(s) not working (1.1.A.3b)
Nearside Rear Anti-roll bar linkage ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front Front position lamp(s) not working (1.1.A.3b)
Offside Rear Anti-roll bar linkage ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Parking brake: efficiency below requirements (3.7.B.7)
Rear Exhaust system not adequately supported (7.1.1)
KNOCK FROM STEERING/FRONT SUSPESION,UNABLE TO LOCATE DURING TEST
OFFSIDE REAR BRAKE DISC CORRODED
SUPENSION COMPONENTS AND GENERAL UNDERSIDE OF VEHICLE CORRODED
Nearside Seat belt anchorage prescribed area is corroded but not considered excessive inner sill (5.2.6)
Offside Seat belt anchorage prescribed area is corroded but not considered excessive inner sill (5.2.6)
o/s/f brake slightly binding
o/s/r park brake only just met requirements
underside surface corrosion
Front Brake pad(s) less than 1.5 mm thick (3.5.1g)
Nearside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Offside rear parking brake recording little or no effort (3.7.B.6a)
Parking brake: efficiency below requirements (3.7.B.7)
Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)
Windscreen wiper does not clear the windscreen effectively (8.2.2)
Front Brake pad(s) less than 1.5 mm thick (3.5.1g)
Nearside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front front brake excessively fluctuating (3.7.B.3)
Offside Rear Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside rear parking brake recording little or no effort (3.7.B.6a)
Parking brake: efficiency below requirements (3.7.B.7)
Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Oil leak
boot floor holed
both rear arb bushes worn
Front Brake pad(s) wearing thin (3.5.1g)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
slight corrosion both rear inner sills
Front Brake pad(s) wearing thin (3.5.1g)
Rear Brake pad(s) wearing thin (3.5.1g)
FUEL ELAP OPENED FROM INSIDE BOOT CABLE FAULTY
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Front Tyre worn close to the legal limit (4.1.E.1)
How Reliable is the Mazda 6?
Based on 1,904,140 MOT tests across 159,651 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
CE04 UHZ is a 2004 Mazda 6 in Red with a 1,798cc petrol engine. This vehicle has been through 17 MOT tests with a personal pass rate of 70.6%.
Across all 2004 Mazda 6 models, the average MOT pass rate is 71.4% with a typical mileage of 81,396 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mazda 6 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 45,082 recorded failures. If you're considering buying CE04 UHZ, it's worth having these areas checked by a mechanic before committing.
The Mazda 6 typically stays on UK roads for around 24 years. At 22 years old, this Mazda 6 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of CE04 UHZ?
You can check the full history of CE04 UHZ by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was CE04 UHZ registered?
CE04 UHZ is a 2004 Mazda 6, first registered on 26 March 2004.
Is CE04 UHZ safe to buy?
The MOT history for CE04 UHZ shows 17 tests with a 70.6% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does CE04 UHZ have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on CE04 UHZ. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.