MOT Status
ExpiredMileage
129,731 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))
Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))
Offside Rear Sub-frame corroded and seriously weakened (5.3.3 (b) (i))
Front Registration plate deteriorated but not likely to be misread (0.1 (b))
Nearside Rear Exhaust mounting defective (6.1.2 (a))
Nearside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Offside Front Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Front Registration plate deteriorated but not likely to be misread (0.1 (b))
Offside Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))
Rear Exhaust mounting defective (6.1.2 (a))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Vehicle structure is corroded but structural rigidity is not significantly reduced under body (6.1.1 (c) (i))
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Rear Exhaust mounting defective (6.1.2 (a))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
sump leaking
Front Sub-frame corroded but not seriously weakened (2.4.G.1)
Front registration plate deteriorated but not likely to be misread (6.3.1d)
Nearside Rear Suspension arm corroded but not seriously weakened (2.4.G.1)
Offside Rear Suspension arm corroded but not seriously weakened (2.4.G.1)
Rear Brake pad(s) wearing thin (3.5.1g)
Rear Sub-frame corroded but not seriously weakened (2.4.G.1)
Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
rust on sills to floors +floors +under sills +chassis +under body rust
Front Sub-frame corroded but not seriously weakened (2.4.G.1)
Front registration plate deteriorated but not likely to be misread (6.3.1d)
Headlamp aim too high both (1.8)
Nearside Rear Suspension arm corroded but not seriously weakened (2.4.G.1)
Offside Rear Suspension arm corroded but not seriously weakened (2.4.G.1)
Rear Brake pad(s) wearing thin (3.5.1g)
Rear Sub-frame corroded but not seriously weakened (2.4.G.1)
Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
rust on sills to floors +floors +under sills +chassis +under body rust
Nearside Front Suspension arm has slight play in a ball joint (2.4.G.2)
Rear Brake pad(s) wearing thin (3.5.1g)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
rear suspension bushes cracking
rust on under sills +front & rear subfeames
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
rear suspension bushes cracking
rust on under sills +front & rear subfeames
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
How Reliable is the Mazda 3?
Based on 2,040,939 MOT tests across 164,053 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
CE06 PWL is a 2006 Mazda 3 in Black with a 1,598cc petrol engine. This vehicle has been through 16 MOT tests with a personal pass rate of 81.3%.
Across all 2006 Mazda 3 models, the average MOT pass rate is 74.6% with a typical mileage of 70,278 miles. This particular vehicle has performed better than the average for its year.
The most common reason a Mazda 3 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 40,716 recorded failures. If you're considering buying CE06 PWL, it's worth having these areas checked by a mechanic before committing.
The Mazda 3 typically stays on UK roads for around 22 years. At 20 years old, this Mazda 3 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of CE06 PWL?
You can check the full history of CE06 PWL by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was CE06 PWL registered?
CE06 PWL is a 2006 Mazda 3, first registered on 11 March 2006.
Is CE06 PWL safe to buy?
The MOT history for CE06 PWL shows 16 tests with a 81.3% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does CE06 PWL have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on CE06 PWL. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.