MOT Status
ExpiredMileage
134,383 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Inner Seat belt anchorage prescribed area is corroded but not considered excessive Sill (7.1.1 (a) (i))
Nearside Outer Seat belt anchorage prescribed area is corroded but not considered excessive Sill (7.1.1 (a) (i))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Inner Seat belt anchorage prescribed area is corroded but not considered excessive Sill (7.1.1 (a) (i))
Offside Outer Seat belt anchorage prescribed area is corroded but not considered excessive Sill (7.1.1 (a) (i))
Rear Suspension component mounting prescribed area is corroded but not considered excessive Underside of body and suspension components (5.3.6 (a) (i))
Nearside Front Position lamp not working (4.2.1 (a))
Nearside Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))
Offside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Offside Headlamp aim too low (4.1.2 (a))
Nearside Front Tyre has ply or cords exposed (5.2.3 (d) (ii)) DANGEROUS
Offside Front Tyre has ply or cords exposed (5.2.3 (d) (ii)) DANGEROUS
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Inner Seat belt anchorage prescribed area is corroded but not considered excessive Sill (7.1.1 (a) (i))
Nearside Outer Seat belt anchorage prescribed area is corroded but not considered excessive Sill (7.1.1 (a) (i))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Inner Seat belt anchorage prescribed area is corroded but not considered excessive Sill (7.1.1 (a) (i))
Offside Outer Seat belt anchorage prescribed area is corroded but not considered excessive Sill (7.1.1 (a) (i))
Rear Suspension component mounting prescribed area is corroded but not considered excessive Underside of body and suspension components (5.3.6 (a) (i))
Underside of vehicle heavily corroded
Nearside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)
Nearside Front position lamp(s) not working (1.1.A.3b)
Nearside Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)
Nearside Rear Shock absorber has a serious fluid leak (2.7.3)
Offside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)
Offside Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)
Underside of vehicle heavily corroded
Offside Rear Shock absorber has a serious fluid leak (2.7.3)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Rear Brake pad(s) wearing thin (3.5.1g)
Vehicle structure has slight corrosion underside (6.1.A.1)
Nearside Front Front suspension has excessive movement at a wishbone pin or bush (2.5.A.1c)
Nearside Front Front suspension has excessive play in a lower suspension ball joint (2.5.B.1a)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front Front suspension has excessive movement at a wishbone pin or bush (2.5.A.1c)
Offside Front Front suspension has excessive play in a lower suspension ball joint (2.5.B.1a)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Rear Exhaust system not adequately supported (7.1.1)
Nearside Rear Lower Tie bar/rod rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Lower Tie bar/rod rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
How Reliable is the Mazda 3?
Based on 2,040,939 MOT tests across 164,053 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
CE06 ZVL is a 2006 Mazda 3 in Grey with a 1,999cc petrol engine. This vehicle has been through 15 MOT tests with a personal pass rate of 73.3%.
Across all 2006 Mazda 3 models, the average MOT pass rate is 74.6% with a typical mileage of 70,278 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mazda 3 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 40,716 recorded failures. If you're considering buying CE06 ZVL, it's worth having these areas checked by a mechanic before committing.
The Mazda 3 typically stays on UK roads for around 22 years. At 20 years old, this Mazda 3 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of CE06 ZVL?
You can check the full history of CE06 ZVL by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was CE06 ZVL registered?
CE06 ZVL is a 2006 Mazda 3, first registered on 23 March 2006.
Is CE06 ZVL safe to buy?
The MOT history for CE06 ZVL shows 15 tests with a 73.3% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does CE06 ZVL have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on CE06 ZVL. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.