MOT Status
ExpiredMileage
64,650 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Body corroded
Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Front Anti-roll bar ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Integral body structure is corroded but structural rigidity is not significantly reduced Floor corroded (6.1.1 (c) (i))
Nearside Front Inner Integral body structure is corroded but structural rigidity is not significantly reduced Body (6.1.1 (c) (i))
Offside Front Inner Integral body structure is corroded but structural rigidity is not significantly reduced Body (6.1.1 (c) (i))
Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Floor (6.1.1 (c) (i))
Nearside Front Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill (6.1.1 (c) (i))
Nearside Front Inner Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Nearside Rear Tyre has a lump, caused by separation or partial failure of its structure (5.2.3 (d) (ii)) DANGEROUS
Offside Front Inner Tyre has ply or cords exposed (5.2.3 (d) (ii)) DANGEROUS
Offside Rear Inner Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Integral body structure is corroded but structural rigidity is not significantly reduced Floor corroded (6.1.1 (c) (i))
Nearside Front Inner Integral body structure is corroded but structural rigidity is not significantly reduced Body (6.1.1 (c) (i))
Offside Front Inner Integral body structure is corroded but structural rigidity is not significantly reduced Body (6.1.1 (c) (i))
Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Nearside Front Inner Integral body structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))
Offside Front Inner Integral body structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))
Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Nearside Rear Brake hose ferrule excessively corroded (1.1.12 (f) (i))
Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill (7.1.1 (a) (i))
Offside Front Brake hose ferrule excessively corroded (1.1.12 (f) (i))
Offside Headlamp not working on main beam (4.1.1 (a) (ii))
Offside Rear Brake hose ferrule excessively corroded (1.1.12 (f) (i))
Nearside Front Tyre has ply or cords exposed (5.2.3 (d) (ii)) DANGEROUS
Nearside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
nearside front inner sill corroded
offside front inner sill corroded
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive floor area (5.3.6 (a) (i))
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive floor area (5.3.6 (a) (i))
Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (i))
Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch /chassis (5.3.6 (a) (i))
Offside Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Offside Hazard warning switch inoperative (4.4.2 (a) (ii))
Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive floor area (5.3.6 (a) (i))
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive floor area (5.3.6 (a) (i))
Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (i))
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive floor area (2.4.A.3)
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive inner wheel arch (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill (2.4.A.3)
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive inner wheel arch (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill (2.4.A.3)
bonnet release handle missing
Nearside Front coil spring broken (2.4.C.1a)
Offside Rear Suspension component mounting prescribed area is excessively corroded inner wheel arch (2.4.A.3)
Fuel system component insecure fuel filter (7.2.1)
Nearside Front Brake pipe slightly damaged broken coil spring rubbing against (2.2.D.2b)
Nearside Front Power steering pipe(s) or hose(s) slightly damaged (2.3.2)
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive floor area (2.4.A.3)
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive inner wheel arch (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill (2.4.A.3)
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive inner wheel arch (2.4.A.3)
Offside Headlamp has a product on the lens but not seriously reducing light output (1.7.5a)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill (2.4.A.3)
bonnet release handle missing
Nearside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Headlamp has a product on the light source but not seriously reducing light output (1.7.5a)
Offside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear tyre worn on inside edge
Nearside Front Front position lamp(s) not working (1.1.A.3b)
Nearside Headlamp aim too high (1.8)
Nearside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Headlamp has a product on the light source but not seriously reducing light output (1.7.5a)
Offside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear tyre worn on inside edge
Rear fog lamp not working (1.3.2b)
Nearside Headlamp aim too low (1.8)
Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Power steering pipe(s) or hose(s) slightly damaged (2.3.2)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Power steering pipe(s) or hose(s) slightly damaged (2.3.2)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Headlamp aim too high (1.8)
Nearside Rear Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
front disc slight judder
How Reliable is the Ford Ka?
Based on 8,818,307 MOT tests across 675,715 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
CE08 VOB is a 2008 Ford Ka in Yellow with a 1,297cc petrol engine. This vehicle has been through 19 MOT tests with a personal pass rate of 63.2%.
Across all 2008 Ford Ka models, the average MOT pass rate is 71.0% with a typical mileage of 41,756 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Ford Ka fails its MOT is suspension component mounting prescribed area is excessively corroded, accounting for 404,005 recorded failures. If you're considering buying CE08 VOB, it's worth having these areas checked by a mechanic before committing.
The Ford Ka typically stays on UK roads for around 29 years. At 18 years old, this Ford Ka is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of CE08 VOB?
You can check the full history of CE08 VOB by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was CE08 VOB registered?
CE08 VOB is a 2008 Ford Ka, first registered on 18 March 2008.
Is CE08 VOB safe to buy?
The MOT history for CE08 VOB shows 19 tests with a 63.2% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does CE08 VOB have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on CE08 VOB. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.