MOT Status
ExpiredMileage
90,373 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
vehicle has been welded and undersealed
Nearside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))
Nearside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Nearside Rear Position lamp not working (4.2.1 (a))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Offside Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))
Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Seat belt anchorage prescribed area is corroded but not considered excessive (7.1.1 (a) (i))
Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Offside Front coil spring corroded (2.4.C.1b)
Offside Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front coil spring corroded (2.4.C.1b)
Offside Headlamp not working on dipped beam (1.7.5a)
Offside Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Offside Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Nearside Stop lamp not working (1.2.1b)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside front brake fluctuating, but not excessively (3.7.B.3)
Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside front brake fluctuating, but not excessively (3.7.B.3)
Offside Stop lamp not working (1.2.1b)
Oil leak
Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone 'A' (8.3.1e)
Oil leak
Nearside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)
Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)
Front Brake pad(s) wearing thin (3.5.1g)
How Reliable is the Ford Ka?
Based on 8,818,307 MOT tests across 675,715 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
CE08 XNS is a 2008 Ford Ka in Blue with a 1,299cc petrol engine. This vehicle has been through 14 MOT tests with a personal pass rate of 64.3%.
Across all 2008 Ford Ka models, the average MOT pass rate is 71.0% with a typical mileage of 41,756 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Ford Ka fails its MOT is suspension component mounting prescribed area is excessively corroded, accounting for 404,005 recorded failures. If you're considering buying CE08 XNS, it's worth having these areas checked by a mechanic before committing.
The Ford Ka typically stays on UK roads for around 29 years. At 18 years old, this Ford Ka is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of CE08 XNS?
You can check the full history of CE08 XNS by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was CE08 XNS registered?
CE08 XNS is a 2008 Ford Ka, first registered on 31 March 2008.
Is CE08 XNS safe to buy?
The MOT history for CE08 XNS shows 14 tests with a 64.3% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does CE08 XNS have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on CE08 XNS. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.