2011 Fiat Panda

Oil leak, but not excessive gearbox leaking nearside (8.4.1 (a) (i))

Brake lever has insufficient reserve travel (1.1.2 (a))

Exhaust has a major leak of exhaust gases (6.1.2 (a))

Nearside Front Seat belt webbing significantly weakened cut from edge greater than 2mm (7.1.2 (b))

Nearside Rear Parking brake inoperative on one side (1.4.1 (a))

Offside Obligatory mirror insecure (3.3 (b) (ii))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Rear fog lamp not working (4.5.1 (a) (ii))

Nearside Front Anti-roll bar ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Front Anti-roll bar ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Oil leak, but not excessive gearbox leaking nearside (8.4.1 (a) (i))

Rear axle corroded

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Offside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Rear Parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (1.4.2 (a) (i))

Offside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))

Nearside Front Tyre(s) with different structures are fitted across the same axle (5.2.3 (c))

Nearside Rear Stop lamp(s) not working (4.3.1 (a) (ii))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Rear Parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (1.4.2 (a) (i))

Offside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Exhaust has a minor leak of exhaust gases back box clamp corroded. leaking from joint. (6.1.2 (a))

Nearside Front Shock absorbers has a serious fluid leak (5.3.2 (b))

Nearside Front Suspension arm pin or bush excessively worn rear bush (5.3.4 (a) (i))

Offside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))

Offside Front Suspension arm pin or bush excessively worn rear bush (5.3.4 (a) (i))

Exhaust has a minor leak of exhaust gases back box clamp corroded. leaking from joint. (6.1.2 (a))

Nearside Rear Tyre worn close to legal limit/worn on edge 2.5mm worn on outer edge (5.2.3 (e))

Front Brake disc worn, pitted or scored, but not seriously weakened both front (1.1.14 (a) (ii))

Front Brake pad(s) wearing thin both front (1.1.13 (a) (ii))

Front Brake disc worn, pitted or scored, but not seriously weakened n/s & o/s on inside faces (1.1.14 (a) (ii))

Front n/s & o/s flexy brake hose ferrels rusted

Rear Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Rear Suspension component pin or bush excessively worn top shock absorber bush (5.3.4 (a) (i))

Rear Tyre tread depth below requirements of 1.6mm n/s & o/s on inside edges (5.2.3 (e)) DANGEROUS

Front Brake disc worn, pitted or scored, but not seriously weakened n/s & o/s on inside faces (1.1.14 (a) (ii))

Front n/s & o/s flexy brake hose ferrels rusted

Rear Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Rear Tyre worn close to the legal limit 2.0mm (4.1.E.1)

Offside Rear Tyre worn close to the legal limit 2.5mm (4.1.E.1)

n/s/f & o/s/f brake discs corroded on inner sufaces

n/s/f & o/s/f tyres worn on inner edges

rear exhaust silencer loose but not insecure

n/s/r tyre devoid of tread on inner edge and close to legal limit

o/s/r tyre close to legal limit

wiper blades deteriorating

Rear exhaust clamp corroded away but exhaust still secure

Rear wiper split

Engine breather pipe split

Items removed from driver's view prior to test

Offside Rear Shock absorber has a slightly worn bush (2.7.4)