2012 Ford Focus

Nearside Rear Sub-frame pin or bush excessively worn (5.3.4 (a) (i))

Offside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Offside Rear Sub-frame pin or bush excessively worn (5.3.4 (a) (i))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Rear Parking (secondary brake) on a single line braking system has inadequate effort at a wheel (1.3.1 (a) (i))

Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Rear Nail in tyre

Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Nearside Stop lamp(s) not working (4.3.1 (a) (ii))

Offside Front Inner Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt split (6.1.7 (g) (ii))

Tyre has ply or cords exposed Both front 215/55/16 (5.2.3 (d) (ii)) DANGEROUS

Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement trailing arm (5.3.4 (a) (i))

Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement trailing arm (5.3.4 (a) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Engine MIL inoperative or indicates a malfunction (8.2.2.2 (g))

Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement trailing arm (5.3.4 (a) (i))

Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement trailing arm (5.3.4 (a) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Front Inner Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Oil leak, but not excessive (8.4.1 (a) (i))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Nearside Front Coil spring fractured or broken (5.3.1 (b) (i))

Nearside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Offside Rear Tyre tread depth below requirements of 1.6mm 215/55/16 (5.2.3 (e)) DANGEROUS

Front Inner Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Oil leak, but not excessive (8.4.1 (a) (i))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Front Inner Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Front Outer Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Inner Brake pad(s) wearing thin (1.1.13 (a) (ii))

Front Suspension arm pin or bush worn but not resulting in excessive movement both sides lower arm - rearward bushes - perished/worn (5.3.4 (a) (i))

Offside Front Brake master cylinder close to minimum mark (1.1.10 (d) (i))

Offside Front Inner Oil leak, but not excessive oil leak from inner drive shaft seal area (8.4.1 (a) (i))

Offside Rear door seal insecure

Rear Parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. high lever travel to brake lock out (1.4.2 (a) (i))

Rear Suspension arm pin or bush worn but not resulting in excessive movement both sides trailing arm main bush - perished/worn (5.3.4 (a) (i))

Nearside Front Inner Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt drive shaft boot split (6.1.7 (g) (ii))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Offside Rear Direction indicator incorrect colour showing white (4.4.3 (a))

Front Suspension arm pin or bush worn but not resulting in excessive movement both sides lower arm - rearward bushes - perished/worn (5.3.4 (a) (i))

Offside Front Brake master cylinder close to minimum mark (1.1.10 (d) (i))

Offside Front Inner Oil leak, but not excessive oil leak from inner drive shaft seal area (8.4.1 (a) (i))

Offside Rear door seal insecure

Rear Parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. high lever travel to brake lock out (1.4.2 (a) (i))

Rear Suspension arm pin or bush worn but not resulting in excessive movement both sides trailing arm main bush - perished/worn (5.3.4 (a) (i))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Oil leak, but not excessive (8.4.1 (a) (i))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Front Headlamp not working on main beam (4.1.1 (a) (ii))

Oil leak, but not excessive (8.4.1 (a) (i))

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Front Tyre worn close to the legal limit both (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Rear starting to get close to legal limit.