2012 Mitsubishi Asx

Nearside Front Shock absorbers has light misting of oil (5.3.2 (b))

Nearside Front Anti-roll bar ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Front Anti-roll bar ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Rear Exhaust emissions likely to be affected by an exhaust leak (8.2.1.1 (b))

Nearside Front Shock absorbers has light misting of oil (5.3.2 (b))

Front Suspension arm corroded but not seriously weakened both sides (5.3.3 (b) (i))

Front Tyre worn close to legal limit/worn on edge both sides (5.2.3 (e))

Nearside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Rear Suspension arm corroded but not seriously weakened both sides (5.3.3 (b) (i))

Emissions unable to be completed (8.2.1.2 (d))

Front Exhaust emissions likely to be affected by an exhaust leak (8.2.1.1 (b))

Front Suspension arm corroded but not seriously weakened both sides (5.3.3 (b) (i))

Front Tyre worn close to legal limit/worn on edge both sides (5.2.3 (e))

Nearside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Rear Suspension arm corroded but not seriously weakened both sides (5.3.3 (b) (i))

Front Tyre worn close to legal limit/worn on edge Both front tyres. 3mm (5.2.3 (e))

Nearside Front Anti-roll bar linkage ball joint dust cover slightly deteriorated.

Nearside Rear Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Offside Front Anti-roll bar linkage ball joint dust cover slightly deteriorated.

Offside Rear Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Rear Suspension arm pin or bush worn but not resulting in excessive movement Both rear arms. coil spring holding arms. (5.3.4 (a) (i))

Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Rear Brake disc worn, but not excessively (1.1.14 (a) (i))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

engine sump corroded

Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Offside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Front Brake pad(s) wearing thin (3.5.1g)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Rear Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Rear Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)