MOT Status
ValidMileage
157,664 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Nearside Rear Outer Brake pad(s) wearing thin close to/on limit (1.1.13 (a) (ii))
Nearside Rear Stop lamp(s) lens defective which has no effect on emitted light (4.3.1 (b) (i))
Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement trailing arm bush (5.3.4 (a) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Rear Tyre has a cut but not deep enough to reach the ply or cords (5.2.3 (d) (i))
Nearside Rear Tyre worn close to legal limit/worn on edge on limit and worn unevenly (5.2.3 (e))
Offside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement trailing arm bush (5.3.4 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Tyre worn close to legal limit/worn on edge 2mm and worn unevenly (5.2.3 (e))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Integral body structure is corroded but structural rigidity is not significantly reduced both sides within 30 cm of rear suspension arm mounts. (6.1.1 (c) (i))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement rear bush starting to perish. (5.3.4 (a) (i))
Nearside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Nearside Rear Stop lamp(s) lens defective which has no effect on emitted light (4.3.1 (b) (i))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement rear bush starting to perish. (5.3.4 (a) (i))
Offside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Rear Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Exhaust emissions exceed manufacturer's specified limit (8.2.2.2 (a))
Integral body structure is corroded but structural rigidity is not significantly reduced both sides within 30 cm of rear suspension arm mounts. (6.1.1 (c) (i))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement rear bush starting to perish. (5.3.4 (a) (i))
Nearside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Nearside Rear Stop lamp(s) lens defective which has no effect on emitted light (4.3.1 (b) (i))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement rear bush starting to perish. (5.3.4 (a) (i))
Offside Front Wheel arch liner broken but not likely to fall off.
Offside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Rear Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Front Inner Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
Nearside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Nearside Rear Stop lamp(s) lens defective which has no effect on emitted light (4.3.1 (b) (i))
Offside Front Inner Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
Offside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))
Rear Integral body structure is corroded but structural rigidity is not significantly reduced both sides within 30 cm of rear suspension arm mounts (6.1.1 (c) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Rear Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
both front suspension lower arms rear bushes starting to perish
Nearside Front Inner Drive shaft joint constant velocity boot severely deteriorated perished (6.1.7 (g) (i))
Nearside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Nearside Rear Outer Stop lamp(s) lens defective which has no effect on emitted light and tail lamp (4.3.1 (b) (i))
Offside Front Inner Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
Offside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
front suspension lower arm rear bushes perishing
Nearside Rear Tyre slightly damaged/cracking or perishing On the legal limit (5.2.3 (d) (ii))
Offside Front Tyre worn close to legal limit/worn on edge Worn on inner edge (5.2.3 (e))
Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Nearside Rear Tyre slightly damaged/cracking or perishing On the legal limit (5.2.3 (d) (ii))
Offside Front Tyre worn close to legal limit/worn on edge Worn on inner edge (5.2.3 (e))
Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e))
Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Slight obstruction to drivers view but not restricting view of driver
Front Registration plate deteriorated but not likely to be misread (0.1 (b))
Offside Lower Items removed from driver's view prior to test ()
Rear Brake pad(s) wearing thin (3.5.1g)
How Reliable is the Ford C-max?
Based on 1,804,249 MOT tests across 138,182 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
CE12 ZDD is a 2012 Ford C-max in Black with a 1,560cc diesel engine. This vehicle has been through 15 MOT tests with a personal pass rate of 86.7%.
Across all 2012 Ford C-max models, the average MOT pass rate is 80.4% with a typical mileage of 59,872 miles. This particular vehicle has performed better than the average for its year.
The most common reason a Ford C-max fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 25,824 recorded failures. If you're considering buying CE12 ZDD, it's worth having these areas checked by a mechanic before committing.
The Ford C-max typically stays on UK roads for around 20 years. At 14 years old, this Ford C-max is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of CE12 ZDD?
You can check the full history of CE12 ZDD by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was CE12 ZDD registered?
CE12 ZDD is a 2012 Ford C-max, first registered on 23 April 2012.
Is CE12 ZDD safe to buy?
The MOT history for CE12 ZDD shows 15 tests with a 86.7% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does CE12 ZDD have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on CE12 ZDD. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.