2003 Peugeot 206

Exhaust back box corroded

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive Upper shock mount (5.3.6 (a) (i))

Offside Front Coil spring corroded (5.3.1 (b) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive Upper shock mount (5.3.6 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Steering rack has slight free play detected at steering wheel (2.3 (a) (i))

sump corroded

Exhaust shield missing where fitted as original equipment creating a risk of fire (6.1.3 (e)) DANGEROUS

Exhaust back box corroded

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive Upper shock mount (5.3.6 (a) (i))

Offside Front Coil spring corroded (5.3.1 (b) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive Upper shock mount (5.3.6 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Steering rack has slight free play detected at steering wheel (2.3 (a) (i))

sump corroded

Headlamp lens slightly defective x2 (4.1.1 (b) (i))

Nearside Front Coil spring fractured or broken (5.3.1 (b) (i))

Nearside Front Inner Brake disc significantly and obviously worn (1.1.14 (a) (i))

Rear Brake load sensing valve inoperative but ABS functioning (1.1.17 (c) (i))

Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))

Headlamp lens slightly defective x2 (4.1.1 (b) (i))

Rear Service brake requirements only just met. It would appear that the braking system requires adjustment or repair x2 (1.2.1 (c))

Brake load sensing valve stiff (1.1.17 (c) (ii))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Oil leak, but not excessive (8.4.1 (a) (i))

Brake load sensing valve stiff (1.1.17 (c) (ii))

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Nearside Rear Wheel bearing has slight play (5.1.3 (a) (i))

Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (1.2.2 (a) (i))

Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Emissions not tested (8.2.1.2 (d))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Offside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Rear Exhaust has a major leak of exhaust gases (6.1.2 (a))

Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Rear Brake load sensing valve stiff (1.1.17 (c) (i))

Play in steering rack inner joint(s)

Nearside Front Track rod end ball joint has excessive play (2.2.B.1f)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Rear Registration plate lamp not working (1.1.C.1d)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Registration plate lamp not working (1.1.C.1d)

Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone 'A' (8.3.1e)

Play in steering rack inner joint(s)

Rear Exhaust has a minor leak of exhaust gases (7.1.2)

exhaust blow down pipe border line

fuel tank strap corroded

rear wiper blade

Offside Rear wheel bearing rough when rotated (2.6.1)

Parking brake lever has no reserve travel (3.1.6b)

Parking brake: efficiency below requirements (3.7.B.7)

Service brake: efficiency below requirements (3.7.B.7)

chips in screen

exhaust blow down pipe border line

fuel tank strap corroded

rear wiper blade

Nearside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Offside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Rear Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Nearside Front Suspension arm has slight play in a ball joint (2.4.G.2)

Offside Rear Radius arm has slight play in a pin bearing (2.4.G.2)

Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

both rear tyres worn on edges close to limits

Brake load sensing valve linkage seized (3.6.E.3)

Nearside Registration plate lamp not working (1.1.C.1d)

Side repeater incorrect colour (1.4.A.2f)

Windscreen wiper does not clear the windscreen effectively (8.2.2)

Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Headlamp aim aimed so that it dazzles other road users (1.8.A.1a)

both front tyres worn on edges close to limits

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Inner Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Inner Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Front Brake pad(s) wearing thin (3.5.1g)

Offside Rear Radius arm has slight play in a pin/bush (2.4.G.2)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)