2003 Toyota Yaris

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner and outer sill (5.3.6 (a) (i))

Nearside Rear Axle swivel pins and bushes swivel pin and/or bush slightly worn Splitting (5.1.2 (b) (i))

Offside Rear Axle swivel pins and bushes swivel pin and/or bush slightly worn Splitting (5.1.2 (b) (i))

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Axle swivel pins and bushes swivel pin and/or bush slightly worn Both rear axle bushes (5.1.2 (b) (i))

Fuel filler neck corroded and undersealed

Offside Rear Sill bubbling - suspect filler

Fuel Pipe/s corroded filler pipes ()

Offside Front Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i))

Central Rear Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Fuel Pipe/s corroded filler pipes ()

Nearside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Both headlamps deteriorating

Both rear axle bushes spliting

Fuel Pipe/s corroded Filler pipes ()

Nearside Front Anti-roll bar linkage rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement Rear bush (2.4.G.2)

Offside Front Anti-roll bar linkage rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement Rear bush (2.4.G.2)

Nearside Front Anti-roll bar linkage rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Anti-roll bar linkage rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

both rear axle bushes starting to seperate

headlamps starting to deteriorate

Nearside Front Anti-roll bar linkage rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Headlamp aim too high (1.8)

Offside Front Anti-roll bar linkage rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Parking brake lever has no reserve travel (3.1.6b)

both rear axle bushes starting to seperate

headlamps starting to deteriorate

Child seat fitted not allowing full inspection of adult belt

Nearside Rear position lamp(s) not working (1.1.A.3b)

Child seat fitted not allowing full inspection of adult belt

Fuel filler pipe corroded.

Offside Stop lamp not working (1.2.1b)

Rear axle bushes becoming worn.

Rear sills corroding underneath.

Fuel filler pipe corroded.

Rear axle bushes becoming worn.

Rear sills corroding underneath.

Child seat fitted not allowing full inspection of adult belt

Nearside Rear Axle swivel joint has slight play (2.5.A.3b)

Nearside Rear coil spring corroded (2.4.C.1b)

Offside Rear Axle swivel joint has slight play (2.5.A.3b)

Offside Rear coil spring corroded (2.4.C.1b)

engine managment light on.

Engine covers fitted obscuring some components in the engine bay

Nearside Front Headlamp aim too low (1.8)

eml light on

Engine covers fitted obscuring some components in the engine bay

eml light on

Nearside Rear Shock absorber has a serious fluid leak (2.7.3)

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Front Anti-roll bar linkage rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Anti-roll bar linkage rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

o/s/f h/lamp adjust motor inop

Registration plate lamp not working (1.1.C.1d)

o/s/f h/lamp adjust motor inop