2004 Lexus IS200

Nearside Front Tyre worn close to legal limit/worn on edge wearing on the inner edge (5.2.3 (e))

Offside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Rear subframe mountings and brackets corroded

Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill corroded through (5.3.6 (a) (i))

Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill corroded through (5.3.6 (a) (i))

Nearside Rear Tyre has a tear, caused by separation or partial failure of its structure cut on outer sidewall through to the structure (5.2.3 (d) (ii)) DANGEROUS

Nearside Front Tyre worn close to legal limit/worn on edge wearing on the inner edge (5.2.3 (e))

Offside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Rear subframe mountings and brackets corroded

Nearside Rear Seat belt anchorage prescribed area is corroded but not considered excessive sill (7.1.1 (a) (i))

Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive mount brackets (5.3.6 (a) (i))

Nearside Rear Tyre slightly damaged/cracking or perishing outer sidewall damaged (5.2.3 (d) (ii))

Offside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Rear Seat belt anchorage prescribed area is corroded but not considered excessive sill (7.1.1 (a) (i))

Offside Rear Subframe mounting prescribed area is corroded but not considered excessive mount brackets (5.3.6 (a) (i))

Nearside Rear Tyre has a cut but not deep enough to reach the ply or cords outer sidewall (5.2.3 (d) (i))

Offside Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Rear Integral body structure is corroded but structural rigidity is not significantly reduced both sills corroded at rear wheel arch (6.1.1 (c) (i))

Rear Inner sills corroded

Rear Wheel arches corroded

Nearside Front tyre heavily worn inner edge

Nearside Rear Subframe mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))

Offside Front Inner Tyre has ply or cords exposed (5.2.3 (d) (ii)) DANGEROUS

Nearside Front tyre heavily worn inner edge

Nearside Rear tyre perished

all 4 x worn uneven

Nearside Rear tyre perished

all 4 x worn uneven

Nearside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e))

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Rear wheel arch corroded

Rear Sub-frame slightly distorted (2.4.G.1)

Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Rear sills corroded

all brake back plates corroded

Front front brake fluctuating, but not excessively (3.7.B.3)

Rear Suspension arm corroded but not seriously weakened (2.4.G.1)

Nearside Front Windscreen has damage to the swept area in excess of a 40mm circle outside zone 'A' (8.3.1d)

Front front brake fluctuating, but not excessively (3.7.B.3)

Rear Suspension arm corroded but not seriously weakened (2.4.G.1)

Rear Anti-roll bar linkage corroded but not seriously weakened (2.4.G.1)

coil spring corroded (2.4.C.1b)

front tyres close to limits

Coolant leak

Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Coolant leak

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Front Shock absorber has a light misting of oil (2.7.3)

front tyres wor on edges

rear tyres worn on outer edges

o.s.f tyre wearing outter edge

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1) DANGEROUS

o/s rear tyre worn on limits

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)