MOT Status
ExpiredMileage
133,841 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))
Nearside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))
Nearside Front Position lamp not working (4.2.1 (a))
Nearside Rear Stop lamp(s) not working (4.3.1 (a) (ii))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))
Items removed from driver's view prior to test ()
Nearside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Nearside Rear Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Offside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Play in steering rack inner joint(s) ()
Rear Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Rear Exhaust mounting defective (6.1.2 (a))
Vehicle underbody corroded
Items removed from driver's view prior to test ()
Nearside Non obligatory mirror damaged ()
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive outer sill corroded but not considered excessive (2.4.A.3)
Offside Seat belt anchorage prescribed area is corroded but not considered excessive outer sill corroded but not considered excessive (5.2.6)
engine management warning lamp illuminated
exhaust heat sheilds insecure
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Stop lamp not working (1.2.1b)
Offside Front Front wheel bearing rough when rotated (2.5.A.2)
Offside Front Suspension arm has excessive play in a ball joint (2.4.G.2)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Rear Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)
Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Items removed from driver's view prior to test ()
Nearside Non obligatory mirror damaged ()
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive outer sill corroded but not considered excessive (2.4.A.3)
Offside Seat belt anchorage prescribed area is corroded but not considered excessive outer sill corroded but not considered excessive (5.2.6)
engine management warning lamp illuminated
exhaust heat sheilds insecure
Front Power steering pipe(s) or hose(s) slightly corroded (2.3.2)
Front exhaust support corroded and damaged
Items removed from driver's view prior to test ()
Nearside Non obligatory mirror damaged ()
Nearside Rear Nail in tyre ()
Nearside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Suspension arm has slight play in a ball joint (2.4.G.2)
Offside Front sill damaged and corroded
Offside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Oil leak ()
Nearside Rear Coil spring not correctly located (2.4.C.2)
Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Rear coil spring broken (2.4.C.1a)
Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Front Power steering pipe(s) or hose(s) slightly corroded (2.3.2)
Front exhaust support corroded and damaged
Items removed from driver's view prior to test ()
Nearside Non obligatory mirror damaged ()
Nearside Rear Nail in tyre ()
Nearside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Suspension arm has slight play in a ball joint (2.4.G.2)
Offside Front sill damaged and corroded
Offside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Oil leak ()
Nearside Rear rear brake fluctuating, but not excessively (3.7.B.3)
Offside Rear rear brake fluctuating, but not excessively (3.7.B.3)
oil leak on gearbox
Nearside Front Front suspension has excessive movement at a wishbone pin or bush lower rear wishbone bush (2.5.A.1c)
Nearside Front Headlamp not working on dipped beam (1.7.5a)
Nearside Front coil spring broken (2.4.C.1a)
Nearside Rear Registration plate lamp not working (1.1.C.1d)
Nearside Rear Stop lamp not working (1.2.1b)
Nearside Rear coil spring broken (2.4.C.1a)
Offside Front Front drive shaft support bearing excessively worn inner (2.5.C.2c)
Offside Front Front suspension has excessive movement at a wishbone pin or bush lower rear wishbone bush (2.5.A.1c)
Offside Front coil spring broken (2.4.C.1a)
Offside Rear Stop lamp not working (1.2.1b)
Nearside Front Tyre has ply or cords exposed (4.1.D.1b) DANGEROUS
Nearside Rear Tyre has a bulge, caused by separation or partial failure of its structure (4.1.D.1b) DANGEROUS
Offside Front Tyre has ply or cords exposed (4.1.D.1b) DANGEROUS
Nearside Rear rear brake fluctuating, but not excessively (3.7.B.3)
Offside Rear rear brake fluctuating, but not excessively (3.7.B.3)
oil leak on gearbox
Items removed from driver's view prior to test
Non obligatory mirror damaged
Body has a projection caused by damage (6.1.C.1)
Front Direction indicators incorrect colour (1.4.A.2f)
Headlamp not working on dipped beam (1.7.5a)
Offside Front position lamp(s) not working (1.1.A.3b)
Offside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)
Rear Exhaust system not adequately supported (7.1.1)
Registration plate lamp not working (1.1.C.1d)
Windscreen washer provides insufficient washer liquid (8.2.3)
Front Brake pad(s) wearing thin (3.5.1g)
Items removed from driver's view prior to test
Non obligatory mirror damaged
exhaust heat shield insecure
rear exhaust hangar broken
Nearside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Headlamp not working on dipped beam (1.7.5a)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Headlamp not working on dipped beam (1.7.5a)
Offside Registration plate lamp not working (1.1.C.1d)
Windscreen washer provides insufficient washer liquid (8.2.3)
Front Brake pad(s) wearing thin (3.5.1g)
Items removed from driver's view prior to test
exhaust heat shield insecure
front discs corroded
rear exhaust hangar broken
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Rear coil spring corroded (2.4.C.1b)
offside front outer tread low
Parking brake: efficiency below requirements (3.7.B.7)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Headlamp not working on dipped beam (1.7.5a)
Offside Front position lamp(s) not working (1.1.A.3b)
Offside Rear coil spring corroded (2.4.C.1b)
offside front outer tread low
Nearside Rear Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Headlamp not working on dipped beam (1.7.5a) DANGEROUS
Offside Headlamp not working on dipped beam (1.7.5a) DANGEROUS
Nearside Rear Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Front Brake lining(s) wearing thin (3.5.1g)
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
How Reliable is the Ford Focus?
Based on 28,316,889 MOT tests across 2,072,617 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
CE55 HVP is a 2005 Ford Focus in Black with a 1,596cc petrol engine. This vehicle has been through 17 MOT tests with a personal pass rate of 52.9%.
Across all 2005 Ford Focus models, the average MOT pass rate is 72.7% with a typical mileage of 74,404 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Ford Focus fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 1,055,468 recorded failures. If you're considering buying CE55 HVP, it's worth having these areas checked by a mechanic before committing.
The Ford Focus typically stays on UK roads for around 27 years. At 21 years old, this Ford Focus is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of CE55 HVP?
You can check the full history of CE55 HVP by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was CE55 HVP registered?
CE55 HVP is a 2005 Ford Focus, first registered on 2 September 2005.
Is CE55 HVP safe to buy?
The MOT history for CE55 HVP shows 17 tests with a 52.9% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does CE55 HVP have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on CE55 HVP. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.