2006 Ford Focus

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear subframe coverd in under seal

Offside Rear Sub-frame pin or bush worn but not resulting in excessive movement trailing arm bush (5.3.4 (a) (i))

Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Offside Rear Sub-frame pin or bush worn but not resulting in excessive movement trailing arm bush (5.3.4 (a) (i))

Rear Exhaust mounting defective (6.1.2 (a))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Offside Rear Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))

Power steering pump leaking (2.1.5 (a))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Front Macpherson strut corroded but not seriously weakened nearside and offside (5.3.3 (b) (i))

Front Suspension arm corroded but not seriously weakened nearside and offside (5.3.3 (b) (i))

Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Rear Suspension arm corroded but not seriously weakened nearside and offside (5.3.3 (b) (i))

Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Rear Suspension arm corroded but not seriously weakened nearside and offside (5.3.3 (b) (i))

Front Vehicle structure is corroded but structural rigidity is not significantly reduced crossmember (6.1.1 (c) (i))

Rear Exhaust mounting defective (6.1.2 (a))

Front Vehicle structure is corroded but structural rigidity is not significantly reduced crossmember (6.1.1 (c) (i))

Rear Exhaust mounting defective (6.1.2 (a))

Front Tyre tread pattern not visible over the whole tread area when minimum depth required is 1.0mm nearside and offside (5.2.3 (e))

Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Rear Upper Suspension arm corroded but not seriously weakened nearside and offside (5.3.3 (b) (i))

Front Windscreen washer provides insufficient washer liquid (3.5 (a))

Nearside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Rear Upper Suspension arm corroded but not seriously weakened nearside and offside (5.3.3 (b) (i))

Exhaust brackets corroded.

Front Sub-frame corroded but not seriously weakened (2.4.G.1)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement Back bush. (2.4.G.2)

Nearside Rear Lower Suspension arm corroded but not seriously weakened (2.4.G.1)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement Back bush (2.4.G.2)

Offside Rear Lower Suspension arm corroded but not seriously weakened (2.4.G.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Rear Exhaust bracket broken.

Rear Sub-frame corroded but not seriously weakened (2.4.G.1)

Front Sub-frame corroded but not seriously weakened (2.4.G.1)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Rear Shock absorber has slight corrosion to the casing (2.7.2a)

Nearside Rear Suspension arm corroded but not seriously weakened (2.4.G.1)

Offside Front Suspension arm has slight play in a ball joint (2.4.G.2)

Offside Rear Nail in tyre ()

Offside Rear Shock absorber has slight corrosion to the casing (2.7.2a)

Offside Rear Suspension arm corroded but not seriously weakened (2.4.G.1)

Rear Exhaust bracket corroded.

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Rear Shock absorber has slight corrosion to the casing (2.7.2a)

Nearside Rear Suspension arm corroded but not seriously weakened (2.4.G.1)

Offside Rear Shock absorber has slight corrosion to the casing (2.7.2a)

Offside Rear Suspension arm corroded but not seriously weakened (2.4.G.1)

Front Shock absorber has slight corrosion to the casing (2.7.2a)

Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Rear Radius arm corroded but not seriously weakened (2.4.G.1)

Front Brake pad(s) wearing thin (3.5.1g)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Front Brake pad(s) wearing thin (3.5.1g)

Offside Front Tyre worn close to the legal limit (4.1.E.1)