2006 Mazda 3

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Offside Floor excessively deteriorated Floor to Sill (6.2.4 (a) (i))

Offside Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced (Sill) (6.1.1 (c) (i))

Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) DANGEROUS

Parking brake efficiency below requirements (1.4.2 (a) (i))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Slight corrosion throughout underside of vehicle

Front Power steering close to minimum mark (2.1.5 (b) (i))

Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Rear outer light protective lens damaged/cracked

Parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. high travel on park brake (1.4.2 (a) (i))

Rear Coil spring corroded both sides springs corroded (5.3.1 (b) (i))

Rear Suspension rod corroded but not seriously weakened all link rod/arms corroded (5.3.3 (b) (i))

Rear Vehicle structure is corroded but structural rigidity is not significantly reduced both sides outer sill areas corroded (6.1.1 (c) (i))

Rear axle corroded

Vehicle structure is corroded but structural rigidity is not significantly reduced front to rear underside floor/sill areas corroded (6.1.1 (c) (i))

Nearside Front Anti-roll bar linkage ball joint excessively worn drop link ball joints excess worn (5.3.4 (a) (i))

Nearside Front Passenger's seat insecure (6.2.6 (a) (ii)) DANGEROUS

Nearside Rear Tyre has ply or cords exposed tyre perished - cords exposed (5.2.3 (d) (ii)) DANGEROUS

Front Power steering close to minimum mark (2.1.5 (b) (i))

Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Rear outer light protective lens damaged/cracked

Parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. high travel on park brake (1.4.2 (a) (i))

Rear Coil spring corroded both sides springs corroded (5.3.1 (b) (i))

Rear Suspension rod corroded but not seriously weakened all link rod/arms corroded (5.3.3 (b) (i))

Rear Vehicle structure is corroded but structural rigidity is not significantly reduced both sides outer sill areas corroded (6.1.1 (c) (i))

Rear axle corroded

Vehicle structure is corroded but structural rigidity is not significantly reduced front to rear underside floor/sill areas corroded (6.1.1 (c) (i))

general corrosion underside.

Offside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Offside Power steering component leaking (2.1.5 (a))

Rear Shock absorbers has an excessively worn bush (5.3.2 (c))

Windscreen washer provides insufficient washer liquid (3.5 (a))

general corrosion underside.

Brake pad(s) wearing thin (1.1.13 (a) (ii))

general corrosion underside.

Brake pad(s) wearing thin (1.1.13 (a) (ii))

Bumper insecure (6.1.4 (a) (i))

Rear Registration plate lamp likely to become detached (4.7.1 (c) (ii))

general corrosion underside.

general corrosion lower body and underside.

Nearside Position lamp not working (4.2.1 (a))

Rear Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

general corrosion lower body and underside.

Lower Body has slight corrosion (6.1.B.2)

Offside Stop lamp not working (1.2.1b)

Offside front brake binding (3.7.B.1)

Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Rear Tyre worn close to the legal limit (4.1.E.1)

Front Windscreen washer provides insufficient washer liquid (8.2.3)

Offside Obligatory mirror seriously damaged, affecting the rear view (8.1.2a)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Body has slight corrosion (6.1.B.2)

Offside Body has slight corrosion (6.1.B.2)

Nail in offside rear tyre

Offside Front Suspension arm rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)