MOT Status
ExpiredMileage
57,415 miAbove average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Front Windscreen wiper does not clear the windscreen effectively both (3.4 (b) (ii))
Nearside Front Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i))
Nearside Front Suspension arm pin or bush excessively worn (5.3.4 (a) (i))
Nearside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced arch (6.1.1 (c) (i))
Nearside Rear Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i))
Offside Front Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i))
Offside Rear Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i))
Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))
Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced boot floor (6.1.1 (c) (i))
Front Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Front Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Front Inner Vehicle structure is corroded but structural rigidity is not significantly reduced arch (6.1.1 (c) (i))
Nearside Front Macpherson strut pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Inner Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Inner Vehicle structure is corroded but structural rigidity is not significantly reduced arch (6.1.1 (c) (i))
Offside Front Macpherson strut pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Front Lower Suspension arm rubber mounting deteriorated but not resulting in excessive movement rear mounting (2.4.G.2)
Nearside Outer Seat belt anchorage prescribed area is excessively corroded sill (5.2.6)
Offside Rear position lamp(s) not working (1.1.A.3b)
Nearside Front Lower Suspension arm rubber mounting deteriorated but not resulting in excessive movement rear mounting (2.4.G.2)
Front Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Macpherson strut has slight movement in the upper support bearing assembly (2.5.B.1b)
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement rear bush (2.4.G.2)
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Radius arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Radius arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear coil spring corroded (2.4.C.1b)
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
both front inner wings corroded
both inner cills to floor corroded
exhaust corroded
Nearside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Front Subframe mounting prescribed area is excessively corroded inner cill to floor (2.4.A.3)
Nearside Seat belt anchorage prescribed area is excessively corroded outer cill (5.2.6)
Offside Front Seat belt anchorage prescribed area is excessively corroded floor (5.2.6)
Offside Front Seat belt anchorage prescribed area is excessively corroded outer cill (5.2.6)
Offside Rear Seat belt anchorage prescribed area is excessively corroded outer cill (5.2.6)
Offside Rear Subframe mounting prescribed area is excessively corroded inner cill (2.4.A.3)
Offside Rear Subframe mounting prescribed area is excessively corroded inner wing wheel arch (2.4.A.3)
Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front Suspension arm rubber bush bonding deteriorated resulting in excessive movement rear bush (2.4.G.2) DANGEROUS
Front Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Macpherson strut has slight movement in the upper support bearing assembly (2.5.B.1b)
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement rear bush (2.4.G.2)
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Radius arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Radius arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear coil spring corroded (2.4.C.1b)
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
both front inner wings corroded
both inner cills to floor corroded
exhaust corroded
Nearside Rear Lower Body has slight corrosion (6.1.B.2)
Offside Front Inner Bonded suspension unit deteriorated but can function as intended (2.4.F.3)
Offside Rear Lower Body has slight corrosion (6.1.B.2)
Nearside Rear Lower Body has slight corrosion (6.1.B.2)
Offside Front Inner Bonded suspension unit deteriorated but can function as intended (2.4.F.3)
Offside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Rear Lower Body has slight corrosion (6.1.B.2)
Child seat fitted not allowing full inspection of adult belt
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Front Brake hydraulic reservoir fluid close to minimum level (3.6.G.1b)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
wiper blade advise off side
wiper blade advise off side
Nearside Front Brake hydraulic reservoir fluid close to minimum level (3.6.G.1b)
Nearside Front Brake pad(s) wearing thin (3.5.1g)
Offside Front Brake pad(s) wearing thin (3.5.1g)
fuel filter rusted advise
Offside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)
Nearside Front Brake hydraulic reservoir fluid level below minimum level (3.6.G.1b)
Offside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)
Child seat fitted not allowing full inspection of adult belt
Child seat fitted not allowing full inspection of adult belt
Front Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone 'A' (8.3.1e)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
How Reliable is the Ford Ka?
Based on 8,818,307 MOT tests across 675,715 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
CE56 LVF is a 2006 Ford Ka in Grey with a 1,299cc petrol engine. This vehicle has been through 16 MOT tests with a personal pass rate of 56.3%.
Across all 2006 Ford Ka models, the average MOT pass rate is 69.7% with a typical mileage of 42,791 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Ford Ka fails its MOT is suspension component mounting prescribed area is excessively corroded, accounting for 404,005 recorded failures. If you're considering buying CE56 LVF, it's worth having these areas checked by a mechanic before committing.
The Ford Ka typically stays on UK roads for around 29 years. At 20 years old, this Ford Ka is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of CE56 LVF?
You can check the full history of CE56 LVF by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was CE56 LVF registered?
CE56 LVF is a 2006 Ford Ka, first registered on 1 September 2006.
Is CE56 LVF safe to buy?
The MOT history for CE56 LVF shows 16 tests with a 56.3% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does CE56 LVF have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on CE56 LVF. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.