2006 Toyota Aygo

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

front sub frame, rear axle, brake pipe front & rear, both side sill all slight corroded

Anti-roll bar pin or bush worn but not resulting in excessive movement both side front (5.3.4 (a) (i))

Suspension arm pin or bush worn but not resulting in excessive movement both side front & both side rear (5.3.4 (a) (i))

front sub frame, rear axle, brake pipe front & rear, both side sill all slight corroded

parking brake weak

Nearside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Nearside Rear Outer Suspension component mounting prescribed area is inadequately repaired sill (5.3.6 (a) (i))

Nearside Rear Stop lamp(s) not working (4.3.1 (a) (ii))

Offside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Front Tyre worn close to legal limit/worn on edge both (5.2.3 (e))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Rear Brake pipe corroded, covered in grease or other material n/s and o/s (1.1.11 (c))

advise welding covered in filler and underseal

Nearside Rear Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i))

Offside Parking brake inoperative on one side (1.4.1 (a))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Front Tyre worn close to legal limit/worn on edge both (5.2.3 (e))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Rear Brake pipe corroded, covered in grease or other material n/s and o/s (1.1.11 (c))

Offside Headlamp aim too high (4.1.2 (a))

Offside Headlamp levelling device inoperative (4.1.5 (a))

Front Exhaust has a major leak of exhaust gases manifold (6.1.2 (a))

Nearside Headlamp aim too high (4.1.2 (a))

Nearside Headlamp light intensity severely reduced (4.1.4 (a))

Offside Front Position lamp not working (4.2.1 (a))

Offside Front Tyre has a bulge, caused by separation or partial failure of its structure (5.2.3 (d) (i))

Offside Headlamp aim too high (4.1.2 (a))

Rear Exhaust has a major leak of exhaust gases (6.1.2 (a))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Nearside Suspension component mounting prescribed area is excessively corroded rear sill (2.4.A.3)

Offside Front position lamp(s) not working (1.1.A.3b)

Windscreen wiper does not clear the windscreen effectively front (8.2.2)

Nearside Rear Suspension component mounting prescribed area is excessively corroded outer sill (2.4.A.3)

Offside Front position lamp(s) not working (1.1.A.3b)

Offside Rear rear brake binding (3.7.B.1)

Windscreen wiper does not clear the windscreen effectively (8.2.2)

Nearside Headlamp aim too low (1.8)