2006 Hyundai Coupe

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Power steering pipe/hose has slight seepage (2.1.5 (a))

Rear Brakes imbalanced across an axle (1.2.1 (b) (i))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Power steering pipe/hose has slight seepage (2.1.5 (a))

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Exhaust has a major leak of exhaust gases (6.1.2 (a))

Front Brakes imbalanced across an axle Axle 1 (1.2.1 (b) (i))

Front Service brake excessively fluctuating (1.2.1 (e))

Headlamp aim too high bothsides (4.1.2 (a))

Nearside Rear Parking brake inoperative on one side (1.4.1 (a))

Rear Brakes imbalanced across an axle (1.2.1 (b) (i))

Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Front Brakes imbalanced across an axle by more than 50% (1.2.1 (b) (ii)) DANGEROUS

Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Offside Front Tyre has ply or cords exposed (5.2.3 (d) (ii)) DANGEROUS

Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) DANGEROUS

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Power steering pipe/hose has slight seepage (2.1.5 (a))

Central Exhaust has a major leak of exhaust gases (6.1.2 (a))

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Nearside Front Service brake excessively fluctuating (1.2.1 (e))

Nearside Rear Brake linkage has restricted free movement (1.1.15 (e))

Nearside Rear Parking brake inoperative on one side (1.4.1 (a))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Rear Exhaust has a major leak of exhaust gases (6.1.2 (a))

Nearside Front Brakes imbalanced across an axle by more than 50% (1.2.1 (b) (ii)) DANGEROUS

Offside Front Tyre has ply or cords exposed (5.2.3 (d) (ii)) DANGEROUS

Offside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Front Power steering pipe/hose has slight seepage (2.1.5 (a))

Nearside Front Brake pipe slightly corroded (3.6.B.2c)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Offside Front Outer Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Parking brake lever has little reserve travel (3.1.6b)

Front Brakes imbalanced across an axle (3.7.B.5b)

Nearside Rear Brake pipe excessively corroded to front (3.6.B.2c)

Nearside Rear brake disc in such a condition that it is seriously weakened (3.5.1i)

Offside Rear Brake pipe leaking to front (3.6.A.1)

Rear Brakes imbalanced across an axle Axle 2 (3.7.B.5b)

Service brake: efficiency below requirements (3.7.B.7)

Offside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Brake pipe slightly corroded front to rear (3.6.B.2c)

Exhaust has a major leak of exhaust gases (7.1.2)

Offside Front Front wheel bearing has excessive play (2.5.A.3c)

Offside Front position lamp(s) not working (1.1.A.3b)

Rear Brakes imbalanced across an axle (3.7.B.5b)

Offside Brake pipe slightly corroded front to rear (3.6.B.2c)

nail in n/s/r tyre

Nearside Front position lamp(s) not working (1.1.A.3b)

Nearside Rear Brake pad(s) wearing thin (3.5.1g)

SLIGHT KNOCK FROM STEERING RACK

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Rear Brake pipe inadequately clipped (3.6.B.1) DANGEROUS

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Offside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)