2007 Mazda 6

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Brake pipe corroded, covered in grease or other material front to rear (1.1.11 (c))

Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

brake servo slow to build vacuum

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Brake pipe corroded, covered in grease or other material front to rear (1.1.11 (c))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

brake servo slow to build vacuum

Nearside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Nearside Front Headlamp lens seriously defective (4.1.1 (b) (ii))

Offside Brake pipe excessively corroded front to rear (1.1.11 (c))

Rear Brakes imbalanced across an axle (1.2.1 (b) (i))

Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Brake pipe corroded, covered in grease or other material front to rear (1.1.11 (c))

Offside Front Headlamp lens slightly defective (4.1.1 (b) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

brake servo slow to build vacuum

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Offside Brake pipe corroded, covered in grease or other material front to rear (1.1.11 (c))

Offside Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

brake servo slow to build vacuum

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Offside Rear Service brake binding but not excessively (1.2.1 (f))

servo slow to build vacuum

Offside Rear Suspension arm corroded and seriously weakened (5.3.3 (b) (i))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Rear Service brake binding but not excessively (1.2.1 (f))

servo slow to build vacuum

Front Tyre worn close to legal limit/worn on edge both (5.2.3 (e))

Rear Brakes just met the limit .Need adjustment or service

Rear Suspension arm pin or bush worn but not resulting in excessive movement Trailing Arms Both (5.3.4 (a) (i))

Rear Suspension component corroded but not seriously weakened bothsides (5.3.3 (b) (i))

Nearside Rear Service brake grabbing severely (1.2.1 (c))

Rear Shock absorbers has a serious fluid leak both (5.3.2 (b))

Front Tyre worn close to legal limit/worn on edge both (5.2.3 (e))

Rear Brakes just met the limit .Need adjustment or service

Rear Suspension arm pin or bush worn but not resulting in excessive movement Trailing Arms Both (5.3.4 (a) (i))

Rear Suspension component corroded but not seriously weakened bothsides (5.3.3 (b) (i))

Nearside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Nearside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Nearside Rear Tyre has ply or cords exposed (4.1.D.1b)

Nearside front brake binding (3.7.B.1)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Front Windscreen washer provides insufficient washer liquid (8.2.3)

Offside Front front brake binding (3.7.B.1)

Nearside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Offside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)