2008 Ford Focus

Offside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Offside Front Suspension arm pin or bush excessively worn (5.3.4 (a) (i))

Offside Rear Outer Seat belt anchorage prescribed area strength or continuity significantly reduced Sill (7.1.1 (a) (i))

Offside Rear Position lamp showing white light to the rear Lens broken (4.2.3 (a) (ii))

Offside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Front Headlamp has a product on the lens but not seriously reducing light output Both (4.1.4 (b))

Front Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Axle corroded

Lower Gearbox mounting defective ()

Nearside Rear Seat belt anchorage prescribed area is corroded but not considered excessive Sill (7.1.1 (a) (i))

Offside Front Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Offside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Seat belt anchorage prescribed area is corroded but not considered excessive Sill (7.1.1 (a) (i))

Rear Axle corroded

Underbody corrosion

Lower Gearbox mounting defective ()

Nearside Seat belt anchorage prescribed area is corroded but not considered excessive sill (7.1.1 (a) (i))

Offside Seat belt anchorage prescribed area is corroded but not considered excessive sill (7.1.1 (a) (i))

Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Lower Gearbox mounting defective ()

Nearside Seat belt anchorage prescribed area is corroded but not considered excessive sill (7.1.1 (a) (i))

Offside Seat belt anchorage prescribed area is corroded but not considered excessive sill (7.1.1 (a) (i))

Nearside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))

Nearside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Offside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Slight leak from engine fuel injector sealing washer

Spare tyre defective ()

Nearside Rear Outer Seat belt retracting mechanism defective (7.1.2 (e))

Nearside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))

Nearside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Offside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Slight leak from engine fuel injector sealing washer

Spare tyre defective ()

near side front anty rattle spring on brake caliper missing

rust all over inner sills

rust all over suspension frames and arms

Front Windscreen wiper does not clear the windscreen effectively both (3.4 (b) (ii))

Windscreen washer provides insufficient washer liquid (3.5 (a))

near side front anty rattle spring on brake caliper missing

rust all over inner sills

rust all over suspension frames and arms

front and rear suspension arms corroded

Anti-lock braking system warning lamp indicates an ABS fault (1.6 (b))

front and rear suspension arms corroded

Nearside Rear Brake cable insecure not located into backplate securely (1.1.15 (c))

Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))

Offside Front Wheel bearing rough when rotated (5.1.3 (b) (i))

Offside Rear Brake cable insecure not located into backplate securely (1.1.15 (c))

Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Offside Front Outer c.v. gaiter small hole present,very slight leakage of grease

Rear Suspension component mounting prescribed area is corroded but not considered excessive rear trailing arm mount points starting to corrode (5.3.6 (a) (i))

Nearside Front Coil spring fractured or broken (5.3.1 (b) (i))

Rear Brake cable damaged both cables snapped (1.1.15 (a))

Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) DANGEROUS

Rear Suspension component mounting prescribed area is corroded but not considered excessive rear trailing arm mount points starting to corrode (5.3.6 (a) (i))

Nearside Rear Registration plate lamp not working (1.1.C.1d)