2009 Kia Rio

Nearside Rear Child Seat fitted not allowing full inspection of adult belt ()

Nearside Rear Outer Tyre worn close to legal limit/worn on edge also perished on outer wall (5.2.3 (e))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

steering wheel cover partly missing

Front Exhaust system insecure (6.1.2 (a))

Nearside Front Track rod end ball joint has excessive play (2.1.3 (b) (i))

Offside Front Suspension arm ball joint excessively worn drop link (5.3.4 (a) (i))

Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Offside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Nearside Rear Child Seat fitted not allowing full inspection of adult belt ()

Nearside Rear Outer Tyre worn close to legal limit/worn on edge also perished on outer wall (5.2.3 (e))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

steering wheel cover partly missing

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

steering wheel worn

Battery insecure and likely to fall from carrier (4.13 (a) (ii))

Nearside Rear Tyre(s) of different sizes are fitted on the same axle. (5.2.3 (b))

Offside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Windscreen washer not working (3.5 (a))

Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

steering wheel worn

Nearside Front Outer tyre worn

Nearside Rear Inner Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Front Inner Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Front Headlamp aim unable to be tested (4.1.2 (b))

Front Registration plate inscription illegible (0.1 (b))

Front Windscreen wiper does not clear the windscreen effectively both sides (3.4 (b) (ii))

Nearside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))

Nearside Rear Brake pipe excessively corroded chasse (1.1.11 (c))

Offside Rear Shock absorbers has a serious fluid leak (5.3.2 (b))

Rear Brake pipe excessively corroded both sides (1.1.11 (c))

Nearside Front Outer tyre worn

Nearside Rear Inner Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Front Inner Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Central Rear Suspension component mounting prescribed area is corroded but not considered excessive general suspension area (5.3.6 (a) (i))

Front Coil spring corroded (5.3.1 (b) (i))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear shock absorber cover insecurre

Nearside Rear Shock absorbers has a serious fluid leak (5.3.2 (b))

Central Rear Suspension component mounting prescribed area is corroded but not considered excessive general suspension area (5.3.6 (a) (i))

Front Coil spring corroded (5.3.1 (b) (i))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear shock absorber cover insecurre

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Front exhaust mount defective but system still secure

Nearside Rear Brake pipe corroded, covered in grease or other material front to back (1.1.11 (c))

Nearside Rear shock absorber cover insecure

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Rear shock absorber cover insecure

Front Windscreen wiper does not clear the windscreen effectively both (3.4 (b) (ii))

Nearside Front Track rod end ball joint has excessive play (2.1.3 (b) (i))

Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Offside Front Track rod end ball joint worn to the extent there is a serious risk of detachment (2.1.3 (b) (ii)) DANGEROUS

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Front exhaust mount defective but system still secure

Nearside Rear Brake pipe corroded, covered in grease or other material front to back (1.1.11 (c))

Nearside Rear shock absorber cover insecure

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Rear shock absorber cover insecure

Front Exhaust mounting defective (6.1.2 (a))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear shock absorber cover insecure

Offside Rear shock absorber cover insecure

Offside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Front Exhaust mounting defective (6.1.2 (a))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear shock absorber cover insecure

Offside Rear shock absorber cover insecure

Rear Tyre(s) of different sizes are fitted on the same axle. (5.2.3 (b))

Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

front pads 3mm approx

Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

front pads 3mm approx

front tyres getting low on shoulders+o/s/r tyre 2mm

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)