2010 Honda Cbr 125 Rw-a

Brake lever is bent but brake can still be readily applied (1.1.2 (d))

Brake pedal is bent but brake can still be readily applied (1.1.2 (d))

Clutch lever shortened (6.2.7 (b))

Drive chain slightly loose (6.1.7 (c) (i))

Drive chain worn but not considered excessive (6.1.7 (c) (i))

Front Direction indicator slightly discoloured (4.4.3 (a))

Nearside Rear Direction indicator lens defective which has no effect on emitted light (4.4.1 (b) (i))

Offside Handlebar deformed but serviceable (2.2.1 (c) (i))

Rear Tyre worn close to the legal limit (5.2.3 (e))

Steering headbearing has slight free play (2.2.2 (f) (i))

Brake lever is bent but brake can still be readily applied (3.1.3c)

Brake pedal is bent but brake can still be readily applied (3.1.3c)

Drive chain worn but not considered excessive stiff links (6.2.1e)

Front Brake disc(s) has slight run out (3.2.A1m)

Rear Brake disc(s) has slight run out (3.2.A1m)

Brake lever cannot be applied smoothly (3.1.3d)

Exhaust excessively deteriorated (7.1.1a)

Exhaust is leaking and excessively noisey (7.1.1b)

Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Front Roller brake test indicates a binding brake (3.3.A1a)

Front suspension assembly component excessively misaligned (2.3.1)

Headlamp aim too high (1.6)

Headlamp insecure (1.2.3b)

Nearside Front Direction indicator not working (1.5.1c)

Nearside Rear Direction indicator damaged and function impaired (1.5.3a)

Offside Front Direction indicator damaged and function impaired (1.5.3a)

Offside Rear Direction indicator flashing less than 60 times a minute (1.5.1c)

Rear Roller brake test indicates a binding brake (3.3.A1a)

Rear Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Registration plate deteriorated (6.3.1d)

Steering movement excessively 'notchy' with the weight on the lower bearing (2.2.1a)

Steering movement excessively 'notchy' with the wheel raised (2.2.1b)

Rear Brake caliper(s) insecure (3.2.A1j) DANGEROUS

Brake lever is bent but brake can still be readily applied (3.1.3c)

Brake pedal is damaged but the brake can still be readily applied (3.1.3c)

Clutch lever shortened. (6.2.1g)

Front Brake disc(s) has slight run out (3.2.A1m)

Rear Brake disc(s) has slight run out (3.2.A1m)

Front Brake lever cannot be applied smoothly (3.1.3d)

Front Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Front Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)