2002 Suzuki Jimny

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Seat belt anchorage prescribed area is corroded but not considered excessive (7.1.1 (a) (i))

Suspension arm pin or bush worn but not resulting in excessive movement perished (5.3.4 (a) (i))

Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

sill covers fitted

Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Seat belt anchorage prescribed area is corroded but not considered excessive sills/floor (7.1.1 (a) (i))

Suspension arm pin or bush worn but not resulting in excessive movement perished (5.3.4 (a) (i))

Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

sill covers fitted

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Suspension arm pin or bush worn but not resulting in excessive movement perished (5.3.4 (a) (i))

Suspension component mounting repair covered in underseal (5.3.6 (a) (i))

Offside Rear Brake pipe excessively corroded (1.1.11 (c))

Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner arch (7.1.1 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Rear Brake pipe excessively corroded (1.1.11 (c))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Suspension arm pin or bush worn but not resulting in excessive movement and rear perished (5.3.4 (a) (i))

Offside Front Integral body structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))

Manufacturer’s engine and body covers fitted restricting inspection of components

Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))

Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))

Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))

Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Fuel Pipe/s corroded ()

Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Seat belt anchorage prescribed area is corroded but not considered excessive (7.1.1 (a) (i))

tyres perished

Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Rear Floor excessively deteriorated (6.2.4 (a) (i))

Seat belt anchorage prescribed area strength or continuity significantly reduced sills both sides (7.1.1 (a) (i))

Brake pipe corroded, covered in grease or other material (1.1.11 (c))

both rear tyres perishing

Nearside Front front brake binding (3.7.B.1)

Nearside Rear Shock absorber has a serious fluid leak (2.7.3)

Nearside Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

both rear tyres perishing

Child seat fitted not allowing full inspection of adult belt

Tow ball/hitch not fitted at time of test

Front Brake pipe excessively corroded (3.6.B.2c)

Child seat fitted not allowing full inspection of adult belt

Tow ball/hitch not fitted at time of test

Child seat fitted not allowing full inspection of adult belt

Tow ball/hitch not fitted at time of test

left hand horn push on steering wheel not working

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)

Offside Front Axle swivel joint has excessive play (2.5.A.3b)

Child seat fitted not allowing full inspection of adult belt

Tow ball/hitch not fitted at time of test

left hand horn push on steering wheel not working

L/hand horn push button on steering wheel not working

Tow ball/hitch not fitted at time of test

Rear registration plate obscured (6.3.1d)

L/hand horn push button on steering wheel not working

Nearside Rear Lower Suspension arm rubber bush bonding deteriorated resulting in excessive movement (2.4.G.2)

Offside Rear Lower Suspension arm rubber bush bonding deteriorated resulting in excessive movement (2.4.G.2)

nearside front tyre was under inflated [10psi], has screw in tread

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Rear Brake pad(s) wearing thin (3.5.1g)

hub vaccum pipes along front axle are VERY RUSTY

spare tyre has cracks in outer wall [deep enought to reach cords]

spare tyre worn both shoulders to 3mm

Nearside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Rear Brake pad(s) wearing thin (3.5.1g)

hub vaccum pipes along front axle are VERY RUSTY

spare tyre has cracks in outer wall [deep enought to reach cords]

spare tyre worn both shoulders to 3mm

Nearside Upper Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Offside Front Brake pad(s) wearing thin (3.5.1g)

front nearside tyre outer wall cracking

Offside Rear Upper Bonded suspension unit deteriorated and cannot function as intended (2.4.F.3)

Nearside Upper Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Offside Front Brake pad(s) wearing thin (3.5.1g)

front nearside tyre outer wall cracking

Front registration plate not displaying a BSAU 145d marking (6.3.3b)

Front registration plate not displaying the postcode of the supplying outlet (6.3.3a)

Nearside Front Brake pad(s) wearing thin (3.5.1g)

Offside Front Brake pad(s) wearing thin (3.5.1g)

Offside front brake juddering slightly (3.7.A.2b)

Rear registration plate not displaying a BSAU 145d marking (6.3.3b)

Rear registration plate not displaying the postcode of the supplying outlet (6.3.3a)

tail exhaust silencer corroded but not blowing

Nearside Front Brake pad(s) wearing thin (3.5.1g)

Offside Front Brake pad(s) wearing thin (3.5.1g)

Offside front brake juddering slightly (3.7.A.2b)

tail exhaust silencer corroded but not blowing

both front brake discs inner faces scalled

both rear tyres worn to 2mm