MOT Status
ExpiredMileage
89,639 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Battery insecure (1.9.1)
Nearside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Nearside Front Tyre has ply or cords exposed (4.1.D.1b)
Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis (6.1.B.2)
Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner wheel arch (6.1.B.2)
Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill (6.1.B.2)
Nearside Rear Stop lamp not working (1.2.1b)
Nearside Rear coil spring broken (2.4.C.1a)
Offside Front Headlamp aim too low (1.8)
Offside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis (6.1.B.2)
Offside Rear Trailing arm has excessive play in a pin/bush axle bush (2.4.G.2)
Parking brake lever has no reserve travel (3.1.6b)
Power steering component(s) leaking steering rack (2.3.3b)
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Body has slight corrosion middle section of chassis (6.1.B.2)
Offside Rear tyre wearing on inner edge
Rear Lower engine mount bush deteriorated but not resulting in any excessive movement
oil leak
Offside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
Parking brake: efficiency below requirements (3.7.B.7)
Nearside Front Headlamp aim too low (1.8)
Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Rear Road wheel with a slightly distorted bead rim (4.2.A.1a)
Offside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)
Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
nearside and offside sills starting to corrode
o/s/f tyre has cut to side wall but not down to cords
Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Rear Road wheel with a slightly distorted bead rim (4.2.A.1a)
Offside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)
Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
nearside and offside sills starting to corrode
o/s/f tyre has cut to side wall but not down to cords
Nearside Front Lower Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Nearside Headlamp aim too low (1.8)
Nearside Inner Front Road wheel bead rim badly distorted (4.2.A.1a)
Nearside Inner Front Tyre has a lump, caused by separation or partial failure of its structure (4.1.D.1b)
Nearside rear brake binding (3.7.B.1)
Offside Front Lower Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Parking brake lever has no reserve travel (3.1.6b)
Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Nearside Front Macpherson strut has excessive movement at the upper attachment (2.5.A.1c)
Nearside Registration plate lamp not working (1.1.C.1d)
Offside Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Registration plate lamp not working (1.1.C.1d)
Nearside Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Offside Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Front brake disc excessively pitted (3.5.1h)
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Front Macpherson strut has slight movement in the upper support bearing assembly (2.5.B.1b)
front discs lipped
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Headlamp not in good working order adversely affecting beam image (1.2.4a)
Windscreen washer provides insufficient washer liquid (8.2.3)
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Front Headlamp not working on dipped beam (1.7.5a)
Nearside Front Macpherson strut has excessive movement at the upper attachment (2.5.A.1c)
Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)
Offside Front Headlamp aim too low (1.8)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
How Reliable is the Ford Ka?
Based on 8,818,307 MOT tests across 675,715 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
CF03 GYP is a 2003 Ford Ka in Black with a 1,299cc petrol engine. This vehicle has been through 22 MOT tests with a personal pass rate of 54.5%.
Across all 2003 Ford Ka models, the average MOT pass rate is 66.4% with a typical mileage of 47,451 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Ford Ka fails its MOT is suspension component mounting prescribed area is excessively corroded, accounting for 404,005 recorded failures. If you're considering buying CF03 GYP, it's worth having these areas checked by a mechanic before committing.
The Ford Ka typically stays on UK roads for around 29 years. At 23 years old, this Ford Ka is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of CF03 GYP?
You can check the full history of CF03 GYP by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was CF03 GYP registered?
CF03 GYP is a 2003 Ford Ka, first registered on 31 March 2003.
Is CF03 GYP safe to buy?
The MOT history for CF03 GYP shows 22 tests with a 54.5% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does CF03 GYP have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on CF03 GYP. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.