2008 Peugeot 107

Indicator switch faulty (4.4.2 (a) (i))

Front Exhaust has a major leak of exhaust gases (6.1.2 (a))

Nearside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Nearside Front Lower Suspension arm pin or bush excessively worn (5.3.4 (a) (i))

Offside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Axle fractured rear axle holed both sides (5.1.1 (a)) DANGEROUS

Indicator switch faulty (4.4.2 (a) (i))

Front Service brake fluctuating, but not excessively (1.2.1 (e))

Nearside Front Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Front Macpherson strut corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Rear Coil spring corroded (5.3.1 (b) (i))

Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement Trailing Arm Bush (5.3.4 (a) (i))

Offside Front Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Front Macpherson strut corroded but not seriously weakened (5.3.3 (b) (i))

Offside Rear Coil spring corroded (5.3.1 (b) (i))

Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement Trailing Arm Bush (5.3.4 (a) (i))

Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Exhaust has a major leak of exhaust gases (6.1.2 (a))

Offside Rear Wheel bearing rough when rotated (5.1.3 (b) (i))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Brake hose has slight corrosion to ferrule both front/rear (1.1.12 (f) (i))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear Coil spring corroded both (5.3.1 (b) (i))

Rear axle slightly corroded

Offside Front Position lamp not working (4.2.1 (a) (ii))

Offside Rear Brake pipe excessively corroded (1.1.11 (c))

Brake hose has slight corrosion to ferrule both front/rear (1.1.12 (f) (i))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear Coil spring corroded both (5.3.1 (b) (i))

Rear axle slightly corroded

Coil spring corroded Both rears (5.3.1 (b) (i))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Suspension component mounting prescribed area is corroded but not considered excessive Rear beam (5.3.6 (a) (i))

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Front brake disc in such a condition that it is seriously weakened (3.5.1i)

Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Offside Front brake disc in such a condition that it is seriously weakened (3.5.1i)

Front brake disc worn, pitted or scored, but not seriously weakened n/s and o/s (3.5.1i)

Front brake disc worn, pitted or scored, but not seriously weakened n/s and o/s (3.5.1i)

Horn not working bad connection (1.6.2a)

Exhaust has a major leak of exhaust gases (7.1.2)

Brake pad(s) wearing thin (3.5.1g)