2008 Yamaha XT 125 X

Front Shock absorber has a light misting of oil (5.3.2 (b))

Drive chain excessively loose (6.1.7 (c) (i))

Headlamp aim too high (4.1.2 (a))

Rear Brake pad(s) less than 1.0 mm thick (1.1.13 (a)) DANGEROUS

Front Shock absorber has a light misting of oil (5.3.2 (b))

Exhaust noisy (8.1.1 (a))

Rear Wheel bearing has slight play (5.1.3 (a) (i))

Offside Front Direction indicator not working (4.4.1 (a) (ii))

Rear Wheel bearing has slight play (5.1.3 (a) (i))

Exhaust noisy (8.1.1 (a))

Exhaust slightly loose (6.1.2 (a))

Front Stop lamp switch does not operate in accordance with the requirements (4.3.2 (a) (i))

Rear Brake pedal has slight side movement indicating a worn pedal bearing or pivot (1.1.1 (b))

Rear tyre sidewalls cracked

Registration plate lamp throwing direct white light to the rear (4.7.1 (a))

Riders seat slightly loose (6.2.5 (a) (ii))

Exhaust noisy (8.1.1 (a))

Exhaust slightly loose (6.1.2 (a))

Front Stop lamp switch does not operate in accordance with the requirements (4.3.2 (a) (i))

Rear Brake pedal has slight side movement indicating a worn pedal bearing or pivot (1.1.1 (b))

Rear tyre sidewalls cracked

Registration plate lamp throwing direct white light to the rear (4.7.1 (a))

Riders seat slightly loose (6.2.5 (a) (ii))

Rear Wheel spindle or securing nut(s) so insecure that wheel security or steering control is adversely affected (5.2.1 (c) (ii))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Registration plate deteriorated but not likely to be misread (0.1 (b))

Steering headbearing slightly stiff or notchy (2.2.2 (f) (i))

front tyre slightly pershished

All direction indicators adversely affected by the operation of another lamp (4.4.3 (b))

Drive chain excessively loose (6.1.7 (c) (i))

Drive chain sprocket worn to excess front & rear (6.1.7 (c) (i))

Headlamp aim too low (4.1.2 (a))

Horn sound not in accordance with requirements (7.7 (c))

Nearside Front Footrest insecure split pin missing (6.2.12 (a))

Offside Rear Direction indicator not working (4.4.1 (a) (ii))

Rear Brake disc significantly and obviously worn buckled (1.1.14 (a) (i))

Rear Brake excessively binding (1.2.1 (f))

Wheel alignment incorrect which adversely affects the handling (2.4 (a))

Handlebar grip insecure to handlebar both (2.2.1 (d) (ii)) DANGEROUS

Stop lamp remains on when the brakes are released (4.3.2 (a) (iii)) DANGEROUS

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Registration plate deteriorated but not likely to be misread (0.1 (b))

Registration plate lamp throwing direct white light to the rear (4.7.1 (a))

Registration plate slightly loose (0.1 (a))

Steering headbearing slightly stiff or notchy (2.2.2 (f) (i))

front tyre slightly pershished

offside rear indicator outer lens missing

cut in rear tyre

Drive chain excessively loose (6.2.1d)

Fork yoke deformed (2.1.1b)

Handlebar deformed (2.1.1b)

Headlamp aim too low dip beam (1.6)

Headlamp at least one does not illuminate on main beam (1.2.2a(ii))

Horn not working (1.7.3a)

Rear Brake component damaged and seriously reduced in strength pads coming away from backing (3.2.A1)

Wheel alignment incorrect which adversely affects the handling over to right (2.5.1)

Steering movement slightly 'notchy' (2.2.1a)

Steering movement slightly 'notchy' (2.2.1b)

cut in rear tyre

Drive chain slightly loose (6.2.1d)

Handlebars slightly bent

Numberplate light not working

Roller brake test indicates slight fluctuation of brake effort Front (3.3.A1d)

Horn not working (1.7.3a)

Nearside Front shock absorber seal failed and leaking oil (2.3.3)

Offside Rear Direction indicator not working (1.5.1c)

Rear Roller brake test indicates excessive fluctuation of brake effort (3.3.A1d)

Drive chain slightly loose (6.2.1d)

Front Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Handlebars slightly bent

Numberplate light not working

Rear Tyre worn close to the legal limit (4.1.3(ii))

Direction indicator slightly discoloured (1.5.1b)

Handlebars slightly bent

Number Plate Light In-Op

Tyre worn close to the legal limit (4.1.3(ii))

Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Direction indicator slightly discoloured (1.5.1b)

Front shock absorber seal failed and leaking oil (2.3.3)

Handlebars slightly bent

Number Plate Light In-Op

Rear wheel bearings have excessive free play (2.4.A.2c)

Tyre worn close to the legal limit (4.1.3(ii))

Direction indicator slightly discoloured (1.5.1b)