2011 Ford Focus

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))

Offside Front Brake pipe inadequately clipped or supported (1.1.11 (d) (i))

Offside Front Play in steering rack inner joint(s) ()

Oil leak, but not excessive transmission (8.4.1 (a) (i))

Rear Axle swivel pins and bushes swivel pin and/or bush slightly worn nearside and offside (5.1.2 (b) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear Suspension component corroded but not seriously weakened (5.3.3 (b) (i))

coolant low level

radiator support corroded

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Front Headlamp aim too high (4.1.2 (a))

Nearside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))

Offside Front Brake pipe inadequately clipped or supported (1.1.11 (d) (i))

Offside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Front Headlamp insecure (4.1.1 (c))

Offside Front Play in steering rack inner joint(s) ()

Oil leak, but not excessive transmission (8.4.1 (a) (i))

Rear Axle swivel pins and bushes swivel pin and/or bush slightly worn nearside and offside (5.1.2 (b) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear Suspension component corroded but not seriously weakened (5.3.3 (b) (i))

coolant low level

radiator support corroded

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))

Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Nearside Front Headlamp aim projected beam image is obviously incorrect water in lamp (4.1.2 (c))

Nearside Front Headlamp aim too low (4.1.2 (a))

Nearside Front Road wheel fixing missing (5.2.1 (a) (i))

Nearside Rear Road wheel fixing missing (5.2.1 (a) (i))

Offside Front Direction indicator not working (4.4.1 (a) (ii))

Offside Front Headlamp aim projected beam image is obviously incorrect water in lamp (4.1.2 (c))

Offside Front Headlamp aim too low (4.1.2 (a))

Offside Front Road wheel fixing missing (5.2.1 (a) (i))

Offside Rear Road wheel fixing missing (5.2.1 (a) (i))

Rear Exhaust shield missing where fitted as original equipment creating a risk of fire missing off fuel tank (6.1.3 (e)) DANGEROUS

Undertray likely to become detached (6.2.1 (a) (ii)) DANGEROUS

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))

Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement rear (5.3.4 (a) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement rear (5.3.4 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Central Exhaust silencer insecure middle to rear (8.1.1 (b) (i))

Nearside Front Coil spring fractured or broken (5.3.1 (b) (i))

Nearside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Nearside Rear Anti-roll bar damaged and seriously weakened (5.3.3 (b) (i))

Offside Front Coil spring fractured or broken (5.3.1 (b) (i))

Offside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Front Service brake grabbing severely (1.2.1 (c))

Offside Rear Stop lamp(s) not working (4.3.1 (a) (ii))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement rear (5.3.4 (a) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement rear (5.3.4 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))