2003 Ford Ka

Nearside Rear Lower Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Lower Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear coil spring fractured (2.4.C.1a)

Offside Registration plate lamp not working (1.1.C.1d)

Front bumper insecure

Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Outer Front constant velocity joint gaiter damaged, but preventing the ingress of dirt (2.5.C.1a)

Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Vehicle structure has slight corrosion (6.1.A.1)

differnet size and type of wheel and tyre fitted to front axle and rear axle

Nearside Headlamp aim too low (1.8)

Offside Outer Front Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

different size tyres on front axle to rear axle

steel wheels fitted to rear of vehicle at time of test

bonnet catch stiff

All position lamps not working (1.1.A.3b)

Direction indicators not working (1.4.A.2c)

Front Tyre(s) incorrect because different size tyres are fitted on the same axle. (4.1.A.1a)

Hazard warning lamps inoperative (1.4.B.1b)

Hazard warning lamps not flashing in phase, with ignition off (1.4.B.1f)

Hazard warning lamps not flashing in phase, with ignition on (1.4.B.1f)

Horn not working (1.6.2a)

Nearside Front Headlamp aim too low (1.8)

Offside Front Headlamp aim too low (1.8)

Position lamp switch does not illuminate the front and rear position lamps with a single operation (1.1.A.2)

Rear Tyre(s) incorrect because different size tyres are fitted on the same axle. (4.1.A.1a)

Nearside Rear Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Outer Front Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

steel wheel fitted nsf at time of test

bonnet catch stiff

wheel nut missing nsr at time of test

Nearside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Road wheel with a slightly distorted bead rim (4.2.A.1a)

Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)

Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

n/s rear footbrake reading is slightly low compared to o/s, slight imbalance/uneven braking to rear footbrake

part of high level stop lamp is not working but less than 50%

rear brake application uneven (3.7.B.2)

Nearside Front Road wheel bead rim badly distorted (4.2.A.1a)

Nearside Front Suspension arm rubber bush bonding deteriorated resulting in excessive movement (2.4.G.2)

Nearside Front position lamp(s) not working (1.1.A.3b)

Nearside Headlamp aim too low (1.8)

Nearside Registration plate lamp not working (1.1.5c)

Nearside Windscreen washer provides insufficient washer liquid (8.2.3)

Offside Front Coil spring not correctly located (2.4.C.2)

Offside Front Suspension arm rubber bush bonding deteriorated resulting in excessive movement (2.4.G.2)

Offside Front position lamp(s) not working (1.1.A.3b)

Offside Headlamp not in good working order adversely affecting beam image (1.2.4a)

Offside Windscreen washer provides insufficient washer liquid (8.2.3)

Nearside Front coil spring fractured (2.4.C.1a) DANGEROUS

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Road wheel with a slightly distorted bead rim (4.2.A.1a)

Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)

Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

part of high level stop lamp is not working but less than 50%

Headlamp not in good working order adversely affecting beam image (1.2.4a)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front coil spring fractured (2.4.C.1a)

Windscreen washer provides insufficient washer liquid (8.2.3)

Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)