2003 Ford Ka

Emissions not tested (8.2.1.2 (d))

Front Brake disc significantly and obviously worn (1.1.14 (a) (i))

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength 30cmm subframe mount (5.3.6 (a) (i))

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor (5.3.6 (a) (i))

Nearside Rear Stop lamp(s) not working (4.3.1 (a) (ii))

Nearside Rear Suspension arm pin or bush excessively worn axle bush (5.3.4 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing (5.3.6 (a) (i))

Offside Rear Suspension arm pin or bush excessively worn axle bush (5.3.4 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing (5.3.6 (a) (i))

Offside Seat belt anchorage prescribed area strength or continuity significantly reduced centre floor sill (7.1.1 (a) (i))

Rear Exhaust has a major leak of exhaust gases (6.1.2 (a))

Nearside Rear Seat belt anchorage prescribed area is corroded but not considered excessive (7.1.1 (a) (i))

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive floor (5.3.6 (a) (i))

Offside Rear Seat belt anchorage prescribed area is corroded but not considered excessive (7.1.1 (a) (i))

Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Front flexi held in place with cable tie

Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Anti-roll bar pin or bush excessively worn d bush (5.3.4 (a) (i))

Offside Front Steering rack has excessive free play detected at the steering wheel (steering rack fitted) tie rod (2.3 (a) (i))

Offside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner cill (7.1.1 (a) (i))

Nearside Rear Wheel bearing so rough it is likely to overheat or break up (5.1.3 (b) (ii)) DANGEROUS

Rear Brakes imbalanced across an axle by more than 50% (1.2.1 (b) (ii)) DANGEROUS

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Front flexi held in place with cable tie

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Windscreen washer provides insufficient washer liquid (8.2.3)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Front Brake hose excessively deteriorated (3.6.B.4d)

Offside Front Brake hose excessively deteriorated (3.6.B.4d)

Offside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Offside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Offside Rear Stop lamp not working (1.2.1b)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Rear Lower Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Rear coil spring broken (2.4.C.1a)

Nearside Stop lamp not working (1.2.1b)

Offside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Offside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Offside Rear Lower Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

BOTH front BRAKE hoses cracking

Both front floors corroded

Both outer sills corroded

Both rear sill returns corroded

Engine oil level low

Offside Stop lamp not working (1.2.1b)

Nearside Front coil spring fractured (2.4.C.1a)

Front Brake pad(s) wearing thin (3.5.1g)

Offside Rear coil spring incomplete (2.4.C.1a)

Front Brake pad(s) wearing thin (3.5.1g)

both rear tyres slightly misshaped on inner edge

MOT CARRIED OUT IN WET CONDITIONS

Nearside Inner Front brake disc slightly pitted (3.5.1h)

Offside Inner Front brake disc slightly pitted (3.5.1h)

nearside front tyre slightly wearing on outer edge

Nearside Front Lower Suspension arm rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)