2005 Citroen C2

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Rear Integral body structure is corroded but structural rigidity is not significantly reduced sill area (6.1.1 (c) (i))

Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive sill and body areas (5.3.6 (a) (i))

Nearside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Rear Integral body structure is corroded but structural rigidity is not significantly reduced sill area (6.1.1 (c) (i))

Offside Rear Subframe mounting prescribed area is corroded but not considered excessive sill and body areas (5.3.6 (a) (i))

Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear suspesnon bump stops missing

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Coil spring corroded (5.3.1 (b) (i))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Integral body structure is corroded but structural rigidity is not significantly reduced sill area (6.1.1 (c) (i))

Nearside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Nearside Rear Service brake binding but not excessively (1.2.1 (f))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive Chassis/body area (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive sill area (5.3.6 (a) (i))

Offside Front Coil spring corroded (5.3.1 (b) (i))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Integral body structure is corroded but structural rigidity is not significantly reduced sill area (6.1.1 (c) (i))

Offside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive chassis/body area (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive sill area (5.3.6 (a) (i))

Rear bump stops missing

Nearside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Coil spring corroded (5.3.1 (b) (i))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Integral body structure is corroded but structural rigidity is not significantly reduced sill area (6.1.1 (c) (i))

Nearside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Nearside Rear Service brake binding but not excessively (1.2.1 (f))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive Chassis/body area (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive sill area (5.3.6 (a) (i))

Offside Front Coil spring corroded (5.3.1 (b) (i))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Integral body structure is corroded but structural rigidity is not significantly reduced sill area (6.1.1 (c) (i))

Offside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive chassis/body area (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive sill area (5.3.6 (a) (i))

Rear bump stops missing

Both rear bump stops are missing

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Front outer sill area slightly corroded

Nearside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Nearside front anti roll bar link rubber boot slightly deteriorated

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Suspension component mounting prescribed area is corroded but not considered excessive Nearside and offside rear chassis area (5.3.6 (a) (i))

Nearside Front Headlamp lens slightly defective (4.1.1 (b) (i))

Offside Headlamp lens slightly defective (4.1.1 (b) (i))

Nearside Headlamp lens slightly defective (4.1.1 (b) (i))

Offside Headlamp lens slightly defective (4.1.1 (b) (i))

Front headlamps slightly deteriorated

Front lower suspension arm bushes are slightly derteriorated

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Front Windscreen wiper blade defective (3.4 (b) (i))

rear bump stops missing

Rear coil spring corroded (2.4.C.1b)

Rear coil spring corroded both (2.4.C.1b)

rear bump stops missing

rear exhaust has advance corrosion

both rear bump stops mising

Both rear bump stops are missing

The nearside front tyre is worn down to approx 2.7mm

The offside front tyre is worn down to approx 3.1mm

The rear bump stops are missing

Nearside Rear Registration plate lamp not working (1.1.C.1d)

The nearside front tyre is worn down to approx 2.7mm

The offside front tyre is worn down to approx 3.1mm

The rear bump stops are missing

Advise o/s/r bump stop missing and n/s/r weak

Nearside Front Shock absorber has a light misting of oil (2.7.3)

Nearside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Offside Outer Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Front brake discs worn

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)