1999 Mercedes-benz 450

All direction indicators not working (4.4.1 (a) (ii))

Front Brakes imbalanced across an axle Axle 1 (1.2.1 (b) (i))

Nearside Headlamp aim projected beam image is obviously incorrect left hand head light fitted (4.1.2 (c))

Nearside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Offside Headlamp aim projected beam image is obviously incorrect left hand head light fitted (4.1.2 (c))

Offside Rear Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i))

Offside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Oil leaking excessively from transmission from oil cooler (8.4.1 (a) (i))

Parking brake lever defective so that it cannot be satisfactorily operated parking brake not holding on ratchet (1.1.6 (d))

Service brake efficiency below requirements (1.2.2 (a) (i))

Speedometer cannot be illuminated (7.8 (c) (ii))

Windscreen washer not working (3.5 (a))

Nearside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Service brake binding but not excessively (1.2.1 (f))

hazard warning lights not working

head lamp warning not working

Exhaust emissions carbon monoxide content excessive (7.3.B.1a)

Front Windscreen washer provides insufficient washer liquid (8.2.3)

Nearside Front Windscreen wiper blade insecure (8.2.2)

Nearside Headlamp not working on dipped beam (1.7.5a)

Offside Battery insecure also corrosion on battery tray (1.9.1)

Offside Front Anti-roll bar attachment bracket inappropriately repaired also corroded (2.4.A.2)

Offside Front Brake pipe excessively corroded under bonnet/inner wing (3.6.B.2c)

Offside Front Obligatory mirror missing (8.1.1)

Offside Front Suspension component mounting prescribed area is excessively corroded inner wing footwell (2.4.A.3)

Offside Front front brake binding (3.7.B.1)

Offside Headlamp aim too low (1.8)

Offside Rear Brake pipe excessively corroded bridge pipe to flexi (3.6.B.2c)

Offside Rear Brake pipe excessively corroded to caliper (3.6.B.2c)

Offside Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive chassis leg to inner wing (2.4.A.3)

corrosion on all brake discs

fog lamp switch not working correctly

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Brake pipe excessively corroded (3.6.B.2c)

Nearside rear brake binding (3.7.B.1)

Offside Front Tyre has a bulge, caused by separation or partial failure of its structure (4.1.D.1b)

Offside rear brake binding (3.7.B.1)

Rear Exhaust has a major leak of exhaust gases (7.1.2)

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Inner Track rod end ball joint has excessive play (2.2.B.1f)