2002 Suzuki Jimny

Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Battery insecure but not likely to fall from carrier (4.13 (a) (i))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Headlamp lens slightly defective Lens cloudy. (4.1.1 (b) (i))

Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Fuel Pipe/s corroded

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Wheel bearing has slight play BOTH REAR (5.1.3 (a) (i))

Exhaust carbon monoxide content at idle exceeds default limits (8.2.1.2 (b))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Fuel Pipe/s corroded

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Wheel bearing has slight play BOTH REAR (5.1.3 (a) (i))

Central Upper Stop lamp(s) with a multiple light source up to 1/2 not functioning (4.3.1 (a) (i))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Rear Shock absorbers has a serious fluid leak (5.3.2 (b))

Offside Rear Shock absorbers has negligible damping effect (5.3.2 (d))

Rear Brake load sensing valve linkage defective and function impaired Spring missing (1.1.17 (a))

Central Upper Stop lamp(s) with a multiple light source up to 1/2 not functioning (4.3.1 (a) (i))

Nearside Rear Shock absorbers has a reduced damping effect (5.3.2 (d))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Front Position lamp incorrect colour after market lights fitted (4.2.3 (a) (i))

Rear Exhaust mounting defective (6.1.2 (a))

Brake load sensing valve linkage defective and function impaired (1.1.17 (a))

Fuel pipe leaking under vehicle (6.1.3 (b) (i))

Nearside Front Brake pipe excessively corroded to rear (1.1.11 (c))

Offside Front Brake pipe excessively corroded to rear (1.1.11 (c))

Offside Front Wheel bearing has excessive play (5.1.3 (a) (i))

Offside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill (6.2.2 (d) (i))

Front Position lamp incorrect colour after market lights fitted (4.2.3 (a) (i))

Rear Exhaust mounting defective (6.1.2 (a))

Suspension component mounting prescribed area is corroded but not considered excessive Both inner sills (5.3.6 (a) (i))

Brake load sensing valve linkage defective and function impaired Spring missing (1.1.17 (a))

Horn not working (7.7 (a) (ii))

Nearside Rear Position lamp not working (4.2.1 (a) (ii))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner wheel arch at body mount (5.3.6 (a) (i))

Front Position lamp incorrect colour Both (4.2.3 (a) (i))

Suspension component mounting prescribed area is corroded but not considered excessive Both inner sills (5.3.6 (a) (i))

Brake pipe corroded, covered in grease or other material All brake pipes heavily coated in under seal and can not be seen. (1.1.11 (c))

Position lamp incorrect colour Both front are blue. (4.2.3 (a) (i))

Brake pipe slightly corroded All pipes front and rear (3.6.B.2c)

brake pipe greased

cracks in rear tyres

N/O side front swivil joints leaking

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)

Exhaust has a major leak of exhaust gases (7.1.2)

Exhaust system not adequately supported (7.1.1)

N/O side front swivil joints leaking

Nearside Rear coil spring corroded (2.4.C.1b)

Offside Rear coil spring corroded (2.4.C.1b)

Rear registration plate deteriorated but not likely to be misread (6.3.1d)

Nearside Front Axle king pin has excessive play in pin and/or bush adversely affecting the steering (2.5.A.3a)

Nearside Rear Brake pipe excessively corroded (3.6.B.2c)

Nearside Rear Registration plate lamp not working (1.1.C.1d)

Offside Front Front position lamp(s) not working (1.1.A.3b)

Rear Brake pipe excessively corroded (3.6.B.2c)

Nearside Rear coil spring corroded (2.4.C.1b)

Offside Rear coil spring corroded (2.4.C.1b)

Rear registration plate deteriorated but not likely to be misread (6.3.1d)

nearside and offside front hub swivels coroding

rear number plate coroding

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Rear Exhaust system not adequately supported (7.1.1)

nearside and offside front hub swivels coroding

rear number plate coroding

advise off side front hub seal leaking.

Offside Registration plate lamp not working (1.1.5c)

Offside Front Lower Axle swivel joint has excessive play in a swivel pin (2.5.A.3b) DANGEROUS

Offside Front Upper Axle swivel joint has excessive play in a swivel pin (2.5.A.3b) DANGEROUS

Nearside Headlamp aim too high (hotspot upper edge above the horizontal 0% line) (1.6.D1)

outer skin cover on rear exhaust silencer showing light corrosion

slight wear taking place in both front hubs

outer skin cover on rear exhaust silencer showing light corrosion

slight wear taking place in both front hubs