MOT Status
ExpiredMileage
113,111 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Offside Rear fog lamp not working (4.5.1 (a) (ii))
Rear fog lamp switch inoperative (4.5.3 (a) (ii))
Nearside Rear Outer Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected sill (5.3.6 (a) (ii)) DANGEROUS
Offside Rear Outer Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected sill (5.3.6 (a) (ii)) DANGEROUS
Nearside Front Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))
Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
EML on
Offside Outer Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)
Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill underside (2.4.A.3)
Offside Rear coil spring corroded (2.4.C.1b)
Offside Track rod end ball joint dust cover deteriorated, but preventing the ingress of dirt (2.2.C.1c)
Oil leak oil filter ()
Rear axle mount bushes deteriorated both sides
Nearside Outer Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Nearside Rear Inner Suspension component mounting prescribed area is excessively corroded sill underside (2.4.A.3)
Offside Front position lamp(s) not working (1.1.A.3b)
Offside Outer Seat belt anchorage prescribed area is excessively corroded sill (5.2.6)
Offside rear brake binding (3.7.B.1)
EML on
Offside Outer Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)
Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill underside (2.4.A.3)
Offside Rear coil spring corroded (2.4.C.1b)
Offside Track rod end ball joint dust cover deteriorated, but preventing the ingress of dirt (2.2.C.1c)
Oil leak oil filter ()
Rear axle mount bushes deteriorated both sides
Front Suspension arm rubber bush deteriorated but not resulting in excessive movement both sides (2.4.G.2)
Nearside Front Inner Suspension spring mounting prescribed area is corroded but not considered excessive arch (2.4.A.3)
Nearside Rear Road wheel with a slightly distorted bead rim (4.2.A.1a)
Offside Outer Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)
Parking brake lever has little reserve travel (3.1.6b)
Rear both axle mount bushes deteriorated
Rear light corrosion to chassis both sides
Nearside Front Outer Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)
Nearside Front Suspension spring mounting prescribed area is corroded but not considered excessive inner arch (2.4.A.3)
Parking brake lever has little reserve travel (3.1.6b)
Suspension arm rubber bush deteriorated but not resulting in excessive movement both front arm inner bushes (2.4.G.2)
both rear axle bushes deteriorated but no play
Nearside Rear Outer Suspension component mounting prescribed area is excessively corroded sill (2.4.A.3)
Offside Front Outer Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Offside Rear Seat belt anchorage prescribed area is excessively corroded chassis (5.2.6)
Offside Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.2.C.1c)
Nearside Front Outer Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)
Nearside Front Suspension spring mounting prescribed area is corroded but not considered excessive inner arch (2.4.A.3)
Parking brake lever has little reserve travel (3.1.6b)
Suspension arm rubber bush deteriorated but not resulting in excessive movement both front arm inner bushes (2.4.G.2)
both rear axle bushes deteriorated but no play
Nearside Rear Road wheel with a slightly distorted bead rim (4.2.A.1a)
Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)
surface corrosion to chassis offside rear
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Road wheel with a slightly distorted bead rim (4.2.A.1a)
Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)
surface corrosion to chassis offside rear
Headlamp deteriorated but light output not reduced (1.7.5a)
Nearside Inner Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Road wheel with a slightly distorted bead rim (4.2.A.1a)
Offside Inner Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)
rear exhaust deteriorated
Nearside front brake binding (3.7.B.1)
Offside Outer Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Headlamp deteriorated but light output not reduced (1.7.5a)
Nearside Inner Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Road wheel with a slightly distorted bead rim (4.2.A.1a)
Offside Inner Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)
rear exhaust deteriorated
An item not tested (Manual)
Nearside Outer Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front Seat belt stitching badly frayed (5.2.2b)
Offside Front position lamp(s) not working (1.1.A.3b)
Nearside front brake binding (3.7.B.1) DANGEROUS
offside rear tyre scrubbed on inner edge
Nearside Outer Front constant velocity joint gaiter deteriorated (2.5.C.1a)
Nearside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Outer Front constant velocity joint gaiter deteriorated (2.5.C.1a)
Offside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
very slight binding to nearside front brake
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Front constant velocity joint gaiter deteriorated (2.5.C.1a)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front constant velocity joint gaiter deteriorated (2.5.C.1a)
Child seat fitted not allowing full inspection of adult belt
Front Brake pad(s) wearing thin (3.5.1g)
nearside front brake binding slightly
Child seat fitted not allowing full inspection of adult belt
Offside Rear Sub-frame rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
both nearside tyres wearing on outer edge
brake pedal anti slip wearing thin
Nearside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
How Reliable is the Mazda Demio?
Based on 136,409 MOT tests across 10,090 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
CK02 MYA is a 2002 Mazda Demio in Blue with a 1,323cc petrol engine. This vehicle has been through 21 MOT tests with a personal pass rate of 71.4%.
Across all 2002 Mazda Demio models, the average MOT pass rate is 74.2% with a typical mileage of 54,250 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mazda Demio fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 7,070 recorded failures. If you're considering buying CK02 MYA, it's worth having these areas checked by a mechanic before committing.
The Mazda Demio typically stays on UK roads for around 28 years. At 24 years old, this Mazda Demio is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of CK02 MYA?
You can check the full history of CK02 MYA by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was CK02 MYA registered?
CK02 MYA is a 2002 Mazda Demio, first registered on 3 May 2002.
Is CK02 MYA safe to buy?
The MOT history for CK02 MYA shows 21 tests with a 71.4% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does CK02 MYA have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on CK02 MYA. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.