2003 Mazda 323

Anti-lock braking system warning lamp indicates an ABS fault (1.6 (b))

Nearside Front Headlamp aim too low (4.1.2 (a))

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor to sill (5.3.6 (a) (i))

Nearside Rear Anti-roll bar ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill and floor to sill area (5.3.6 (a) (i))

Nearside Rear Outer Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))

Offside Front Headlamp aim too low (4.1.2 (a))

Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced center outer sill (7.1.1 (a) (i))

Offside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor to sill (5.3.6 (a) (i))

Offside Rear Anti-roll bar ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength in 2 places (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill and floor to sill (5.3.6 (a) (i))

Brake warning device malfunctioning or defective (1.1.4 (a) (i))

Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

due to heavy corrosion to car and condition that it is in my opinion would be beyond econ repair

no washers on offside front

offside front mirror taped on

rad also leaking

engine missfire

Engine MIL inoperative or indicates a malfunction (8.2.2.2 (g))

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Exhaust carbon monoxide content at idle exceeds default limits (8.2.1.2 (b))

Exhaust carbon monoxide content at idle exceeds manufacturer's specified limits (8.2.1.2 (b))

Nearside Rear Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i))

Offside mirror damaged

engine missfire

Offside wing mirror damaged

General corrosion under car front and rear, and welded repairs covered in underseal.

Nearside Front Inner Brake pad(s) wearing thin (3.5.1g)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Front Inner Brake pad(s) wearing thin (3.5.1g)

Parking brake lever has little reserve travel (3.1.6b)

Nearside Front Anti-roll bar linkage ball joint dust cover insecure so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Front Anti-roll bar linkage ball joint dust cover insecure so that it no longer prevents the ingress of dirt (2.4.G.2)

Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3) DANGEROUS

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3) DANGEROUS

General corrosion under car front and rear, and welded repairs covered in underseal.

Nearside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Nearside Front Inner Brake pad(s) wearing thin (3.5.1g)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Offside Front Inner Brake pad(s) wearing thin (3.5.1g)

Parking brake lever has little reserve travel (3.1.6b)

Welded repairs covered in underseal

nearside front tyre worn on inner edges

Nearside Rear Seat belt anchorage prescribed area is excessively corroded (5.2.6) DANGEROUS

Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3) DANGEROUS

Offside Rear Seat belt anchorage prescribed area is excessively corroded (5.2.6) DANGEROUS

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3) DANGEROUS

nearside front tyre worn on inner edges

Parking brake lever has little reserve travel (3.1.6b)

Vehicle structure has slight corrosion (6.1.A.1)

Nearside Headlamp aim too low (1.8)

Offside Headlamp aim too low (1.8)

front brake application uneven (3.7.B.2) DANGEROUS

front brakes release unevenly (3.7.B.4) DANGEROUS

Parking brake lever has little reserve travel (3.1.6b)

Vehicle structure has slight corrosion (6.1.A.1)

Vehicle structure has slight corrosion (6.1.A.1)

Rear Vehicle structure has slight corrosion (6.1.A.1)

Nearside Front Anti-roll bar linkage ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Front Anti-roll bar linkage ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)

Rear Vehicle structure has slight corrosion (6.1.A.1)

Offside Front Tyre not fitted in accordance with side wall instructions (4.1.D.1f)

both front tyres wearing on edges

Offside Rear Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)