CarVerify

Free Car Check

CK03 KZW

2003 Mazda 6

Black Petrol 1999cc
Search another vehicle

MOT Status

Expired
Expires3 Mar 2017
Tests16 (11 pass, 5 fail)
Pass rate68.8%

Mileage

122,080 mi
Last recorded122,080 miles
Recorded on27 Feb 2017
Typical for 2003 Mazda 683,392 mi

Significantly above average — investigate

4 checks still locked for this Mazda
Stolen
Finance
Write-off
Keepers
Unlock full report — £4.99
Instant £30k guarantee
or single check £9.99

Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.

Vehicle Details

RegistrationCK03 KZW
MakeMazda
Model6
Year2003
ColourBlack
Fuel typePetrol
Engine1,999cc

All premium checks include

50+ data points
Finance Check (Experian) Insurance Write-off Salvage Auction Stolen Check Previous Owners Ex-Taxi, Police, NHS Mileage Anomaly Import / Export Scrapped Check Plate Changes

MOT History

11 pass 5 fail
Fail 27 Feb 2017 122,080 miles

Nearside Front Front position lamp(s) not working (1.1.A.3b)

Nearside Front Headlamp aim too high and too far to the right. (1.8)

Nearside Front Seat belt anchorage prescribed area is excessively corroded outter cill (5.2.6)

Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Headlamp aim too low (1.8)

Offside Front Seat belt anchorage prescribed area is excessively corroded outter cill (5.2.6)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Windscreen washer provides insufficient washer liquid (8.2.3)

Offside Rear Brake pad(s) wearing thin (3.5.1g)

Pass 23 Feb 2016 110,897 miles

Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Fail 22 Feb 2016 110,897 miles

Offside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Pass 4 Mar 2015 97,956 miles

Inner and outter cills corroded.

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Fail 27 Feb 2015 97,956 miles

Nearside Front Headlamp aim too low (1.8)

Nearside Outer Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Nearside Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Rear registration plate deteriorated (6.3.1d)

Nearside Front Brake hose excessively damaged (3.6.B.4d) DANGEROUS

Inner and outter cills corroded.

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Pass 14 Feb 2014 83,044 miles

Front Sub-frame corroded but not seriously weakened (2.4.G.1)

Nearside Front Suspension arm corroded but not seriously weakened (2.4.G.1)

Nearside Inner Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Outer Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Rear Lower Suspension arm corroded but not seriously weakened (2.4.G.1)

Offside Front Suspension arm corroded but not seriously weakened (2.4.G.1)

Offside Inner Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Outer Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Rear Lower Suspension arm corroded but not seriously weakened (2.4.G.1)

Rear Anti-roll bar corroded but not seriously weakened (2.4.G.1)

Rear Sub-frame corroded but not seriously weakened (2.4.G.1)

exhaust system is corroded

Fail 7 Feb 2014 83,044 miles

Nearside Outer Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Anti-roll bar linkage insecure (2.4.G.1)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front position lamp(s) not working (1.1.A.3b)

Offside rear parking brake recording little or no effort (3.7.B.6a)

Parking brake lever has no reserve travel (3.1.6b)

Parking brake: efficiency below requirements (3.7.B.7)

Front Sub-frame corroded but not seriously weakened (2.4.G.1)

Nearside Front Suspension arm corroded but not seriously weakened (2.4.G.1)

Nearside Inner Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Outer Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Rear Lower Suspension arm corroded but not seriously weakened (2.4.G.1)

Offside Front Suspension arm corroded but not seriously weakened (2.4.G.1)

Offside Inner Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Outer Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Rear Lower Suspension arm corroded but not seriously weakened (2.4.G.1)

Rear Anti-roll bar corroded but not seriously weakened (2.4.G.1)

Rear Sub-frame corroded but not seriously weakened (2.4.G.1)

exhaust system is corroded

Pass 14 Feb 2013 76,682 miles

ALL SUSPENSION COMPONANTS HEAVILY CORRODDED FRONT AND REAR

UNDER AND OUTER SILLS HAVE HEAVY SURFACE COROSSION

Fail 31 Jan 2013 76,682 miles

Nearside Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Rear Body has a sharp edge caused by corrosion (6.1.C.1)

Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Rear rear brake binding (3.7.B.1)

Offside Front Lower Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)

ALL SUSPENSION COMPONANTS HEAVILY CORRODDED FRONT AND REAR

UNDER AND OUTER SILLS HAVE HEAVY SURFACE COROSSION

Pass 20 Feb 2012 69,707 miles
Pass 14 Feb 2011 63,003 miles
Pass 22 Feb 2010 57,468 miles
Pass 17 Feb 2009 51,599 miles
Pass 28 Feb 2008 45,671 miles
Pass 26 Feb 2007 39,333 miles
Pass 31 Mar 2006 31,055 miles

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

How Reliable is the Mazda 6?

Based on 1,904,140 MOT tests across 159,651 vehicles.

75.4%
Pass Rate
7,713
Miles/Year
24
Year Lifespan
159,651
On UK Roads

Top MOT Failure Points

Tyre tread depth below requirements of 1.6mm 45,082
position lamp(s) not working 38,980
Brake pad(s) less than 1.5 mm thick 34,576
Registration plate lamp not working 29,515
Windscreen wiper does not clear the windscreen effectively 28,494
Full Mazda 6 reliability report

Don't risk it. Know before you buy.

Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.

£30k guarantee Instant results Cancel anytime

CK03 KZW is a 2003 Mazda 6 in Black with a 1,999cc petrol engine. This vehicle has been through 16 MOT tests with a personal pass rate of 68.8%.

Across all 2003 Mazda 6 models, the average MOT pass rate is 71.6% with a typical mileage of 83,392 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.

The most common reason a Mazda 6 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 45,082 recorded failures. If you're considering buying CK03 KZW, it's worth having these areas checked by a mechanic before committing.

The Mazda 6 typically stays on UK roads for around 24 years. At 23 years old, this Mazda 6 is approaching the upper end of the typical lifespan for this model.

Frequently Asked Questions

How do I check the history of CK03 KZW?

You can check the full history of CK03 KZW by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.

What year was CK03 KZW registered?

CK03 KZW is a 2003 Mazda 6, first registered on 31 March 2003.

Is CK03 KZW safe to buy?

The MOT history for CK03 KZW shows 16 tests with a 68.8% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.

Does CK03 KZW have outstanding finance?

Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on CK03 KZW. If you buy a car with outstanding finance, the finance company can repossess it.

No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.