2003 Ford Focus

Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Nearside Rear Lower Suspension arm likely to fail heavily corroded (5.3.3 (b) (ii)) DANGEROUS

Nearside Rear Suspension spring mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected (5.3.6 (a) (ii)) DANGEROUS

Offside Rear Suspension arm likely to fail heavily corroded (5.3.3 (b) (ii)) DANGEROUS

Offside Rear Suspension spring mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected (5.3.6 (a) (ii)) DANGEROUS

Nearside Rear Tyre worn close to legal limit/worn on edge to limit (5.2.3 (e))

Exhaust mounting defective Both front pipe and rear section mounting defective, system secured by rear silencer hanger (6.1.2 (a))

Fluid leak, but not excessive Coolant leaking from fractured header tank (8.4.1 (a) (i))

Nearside Rear Coil spring corroded (5.3.1 (b) (i))

Offside Front Tyre worn close to legal limit/worn on edge Tread depth 2mm (5.2.3 (e))

Offside Rear Coil spring corroded (5.3.1 (b) (i))

Oil leak, but not excessive Transmission (8.4.1 (a) (i))

Nearside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt Boot split (6.1.7 (g) (ii))

Nearside Front Upper Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Nearside Side repeater not working (4.4.1 (a) (ii))

Offside Front Lower Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt Boot insecure (6.1.7 (g) (ii))

Offside Track rod end ball joint has excessive play (2.1.3 (b) (i))

Exhaust mounting defective Both front pipe and rear section mounting defective, system secured by rear silencer hanger (6.1.2 (a))

Fluid leak, but not excessive Coolant leaking from fractured header tank (8.4.1 (a) (i))

Nearside Rear Coil spring corroded (5.3.1 (b) (i))

Offside Front Tyre worn close to legal limit/worn on edge Tread depth 2mm (5.2.3 (e))

Offside Rear Coil spring corroded (5.3.1 (b) (i))

Oil leak, but not excessive Transmission (8.4.1 (a) (i))

Nearside Front Fluid leak, but not excessive (8.4.1 (a) (i))

Nearside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Rear tyre cracking

front exhaust rubbers

Nearside Front Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)

Nearside Front front brake binding (3.7.B.1)

Nearside Registration plate lamp not working (1.1.C.1d)

Offside Front Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Registration plate lamp not working (1.1.C.1d)

Nearside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Rear tyre cracking

front exhaust rubbers

Front Suspension component mounting prescribed area is corroded but not considered excessive + rear (2.4.A.3)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

both front hubs rusty

oil leak

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Front Suspension component mounting prescribed area is corroded but not considered excessive + rear (2.4.A.3)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

both front hubs rusty

oil leak

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Oil leak

Rear Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Exhaust has a minor leak of exhaust gases (7.1.2)

Oil leak

Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

offside rear tyre perished

Nearside Front Track rod end ball joint has excessive play (2.2.B.1f)

Nearside front brake binding (3.7.B.1)

Offside Rear fog lamp not working (1.3.2b)

Offside Rear position lamp(s) not working (1.1.A.3b)

Rear Registration plate lamp not working (1.1.C.1d)

Oil leak

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)